EmbDev.net

Forum: FPGA, VHDL & Verilog Use I2C Core on DE0?


Author: Mo (Guest)
Posted on:

Rate this post
0 useful
not useful
Hi,

I have the DE0 board and the Opencores I2C master core.
Has someone already used it and has an example for how to use the core 
for sending data to and receive from a slave on the bus with VHDL??

Core Author: Richard Herveille

Thx.

Author: Duke Scarring (Guest)
Posted on:

Rate this post
0 useful
not useful
Mo wrote:
> Has someone already used it
Yes.

> and has an example for how to use the core
No, not really. It connected the core with different Softcores.

If I remember correctly, it works without hazzle...

Duke

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [vhdl]VHDL code[/vhdl]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]




Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.