Hi, I built a tester with ATMEGA328P-PU with display graph((LCD12864). To my mistake it was destroyed the ADC1 port. Since I have an Arduino Uno with a ATMEGA328P-PU to program, I want to have the procedure and FW to program it and replace the broken one. You can kindly help me? Thank you Antonio
Antonio wrote: > Hi, I built a tester with ATMEGA328P-PU with display graph((LCD12864). > To my mistake it was destroyed the ADC1 port. Since I have an Arduino > Uno with a ATMEGA328P-PU to program, I want to have the procedure and FW > to program it and replace the broken one. You can kindly help me? > Thank you > Antonio Hi Antonio, did someone replied on your comment ? I posted a thread but I doubt that anyone will respond.
Hey Antonio, from what I've read you want to replace your bricked ATmega 328P chip? Then you'll need to flash a bootloader on a new one. For that you could use your Arduino with the bricked chip like here: https://www.frag-duino.de/index.php/maker-faq/35-programmieren-eines-atmel-atmega-328p-mit-dem-arduino-uno-bootloader (its in german, but try translating it with Google). Then get the bricked chip out and put the new one in. Or else, just use another ADC input, you have 5 of them.
Hello Antonio, If not too late, you can find the firmware sources here : https://github.com/svn2github/transistortester/tree/master/Software/Markus Best regards
hello, can anybody send me the schematic or pcb? my email: softwarekardo@gmail.com thank you
Watch this topic
Disable multi-page viewPlease log in before posting. Registration is free and takes only a minute.
Existing account
Do you have a Google/GoogleMail account? No registration required!
Log in with Google account
Log in with Google account
No account? Register here.