EmbDev.net

Forum: FPGA, VHDL & Verilog i got a problem


Author: krishna raj (Guest)
Posted on:

Rate this post
-1 useful
not useful
i m currently using vivado tool to design my rrh project i want to 
convert 20mhz to 470mhz using duc but in xilinx duc it can convert only 
upto 245mhz can u help me plz how it can be done
and use of multi carrier and if passband in duc

Author: Duke Scarring (Guest)
Posted on:

Rate this post
0 useful
not useful
plz xpln yur abbr:
rrh? remote radio head?
duc?
mhz? milli hertz?
and which dvc?

Author: Lothar Miller (lkmiller) (Moderator)
Posted on:

Rate this post
0 useful
not useful
krishna raj wrote:
> can u help me plz
I know a big bunch of englisch words consisting of much more than 3 
letters. Maybe by using them you can explain your problem in a way even 
others can understand it. By doing this you can add some more 
information about the actual problem and what part of the toolchain 
reports it.

BTW: "i got a problem" is not a good title for a thread. Indeed it is a 
very, very poor title, because almost everybody writing here has "a 
problem". Got the point?

: Edited by Moderator
Author: -gb- (Guest)
Posted on:

Rate this post
0 useful
not useful
He wants to use DUC from Xilinx:

https://www.xilinx.com/products/intellectual-prope...

But as it reads there:

>Supports DUC output sample rates ranging from 30.72MSPS to 245.76MSPS
>Supports DDC input sample rates ranging from 30.72MSPS to 184.32MSPS

krishna raj wrote:
> i want to
> convert 20mhz to 470mhz

I don't know if you mean analog Frequency or Samplerate, if the last, 
then your input Samplerate is too low and your desired output Samplerate 
too high.

Author: berndl (Guest)
Posted on:

Rate this post
0 useful
not useful
Duke Scarring wrote:
> plz xpln yur abbr:
> rrh? remote radio head?
> duc?
> mhz? milli hertz?
> and which dvc?

:o)

Well done!

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [vhdl]VHDL code[/vhdl]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]




Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.