H-JTAG Error: Can't halt target

Amit C. OP #2457438
Rate this post
• ▲ useful
▼ not useful 
Hi All,

Recently I build a wiggler clone with reference attached 
schematic(jtagwigglersch.jpg).

I using my own lpc2148 development kit, I tried to debug my board with 
H-JTAG.

It is really surprising for me that I'm able to detect the device(please 
see Connection.jpg) but while debugging the code I using the check 
option in H-Flasher to verify the connection. It is giving me error: 
Cant halt target and make it enter debug.

If anybody have faced this kind of problem share the solution for this.



Thanks,
Amit C
Attached files:
Reply Quote Edit Move Thread sperren Anmeldepflicht aktivieren Anpinnen Delete topic Thread mit anderem zusammenführen Report post
Amit C Guest #3525151
Rate this post
• ▲ useful
▼ not useful 
Hello,

I don't have tool to draw a schematic, but I'll explain the changes.

1. Connect the 6th no pin of parallel port to 9 no pin of 74xx244.
2. Connect 11 no pin of 74xx244 to the 3rd no pin of jtag header.
3. And 18 no pin of 74xx244 to ground.

Thanks
Amit
Reply Quote Edit Delete Report post
s .vrao Guest #5237026
Rate this post
• ▲ useful
▼ not useful 
hi frinds
i have a problem with above circuit when i am using this circuit for 
lpc1768 the h-jtag server was not connecting.it was showing the massage 
unable to load h-jtag lpt driver. only usb modem is supported.please 
help me ....
Attached files:
Reply Quote Edit Delete Report post
Watch this topic

Reply

Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.

Formatting
  • [c]C-Code[/c]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]
  • [[Title]] – link to an article
  • Link to another post: right-click its post ID (#8078628), copy the address, paste it into the text

More about formatting

Post long source code as an attachment, not in the text.

Your name and e-mail address

Already registered? Log in

Not shown to anyone. We send you a link; your post appears once you confirm it there.

By submitting you create a free account and accept the terms of use.