How write to CH552 data flash

Bert V. OP (Company: CruzPro Ltd.) #7683926

I would like so me help writing to CH552 data flash. I am able to write and read to/from standard flash memory but when I try to write to 0xC000 to 0xC0FF the CH552 reboots continuously.

I tried just reading from 0xC000-0xC0FF without writing and the CH552 still reboots continuously.

I have attached a text file showing how I try to write to data flash. This works OK if writing to flash below 16K.

Regards,

Bert

Attached files:
Reply Quote Edit Move Thread sperren Slow mode Anmeldepflicht aktivieren Anpinnen Delete topic Thread mit anderem zusammenführen Report Thanks
Thomas Z. #7683932

Bert V. wrote:

I tried just reading from 0xC000-0xC0FF without writing and the CH552 still reboots continuously.

reading the dataflsh does not work with movc, movc > 0x3FFF gives a reset

1
 
//flashaccess must be already activated

2
 
uint8_t ReadDataFlash(uint8_t addr, uint8_t *value)

3
 
{

4
 
   if((value) && (addr < 128))

5
 
   {

6
 
      ROM_ADDR = DATA_FLASH_ADDR | (addr < 1);

7
 
      ROM_CTRL = ROM_CMD_READ;

8
 
      if(ROM_STATUS & bROM_CMD_ERR) return 0xFE; // cmd error

9
 
      *value = ROM_DATA_L;

10
 
      return 0;                                  // success

11
 
   }

12
 
   return 0xFF;                                  // param error  

13
 
}

writefunction is similar to the above

Reply Quote Edit Delete Report Thanks
Bert V. OP (Company: CruzPro Ltd.) #7685041

I figured that out :-)

I have been testing the DataFlash with an endurance test. The CH552 user manual states it's good for 10,000 writes. It's still working after over 200,000 write/read cycles.

Reply Quote Edit Delete Report Thanks
Watch this topic

Reply

A question of your own? This thread is over 2 years old. Ask it in a thread of its own – more people read along there, and it gets answered more often and sooner.

Start a new thread

A fix, an addition or feedback on this thread? Then reply here.

Formatting
  • [c]C-Code[/c]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]
  • [[Title]] – link to an article
  • Link to another post: right-click its post ID (#8078628), copy the address, paste it into the text

More about formatting

Post long source code as an attachment, not in the text.

Your name and e-mail address

Already registered? Log in

Not shown to anyone. We send you a link; your post appears once you confirm it there.

By submitting you create a free account and accept the terms of use.