Compiler: IAR EWARM 4.41 A Microcontroller: at91SAM7A3 Hello my friends, I have a bit difficult situation here. I wrote a bootloader, which is working fine I guess. I haven't tested enough to make sure it is very stable, so that's why I have a question. I want to debug firmware which is not placed at the start address of the flash, but at about 10 kB further. Is that easy to debug, cause normally firmware starts at address 0. Please give me some tips, links or whatever can help me. Thank you very much.
I know it might be a difficult question, but is there really no experts who can give me some hints or tips? If the question is not clear, I can try explaining my situation more. Thank you.
Guest
#741870
Laß doch den Quatsch mit Deinem Englisch, soo toll ist das auch wieder nicht. Beitrag "SDHC support" Wenn Du angeblich kein Deutsch verstehst, wieso nennst Du dann eine Datei 'Bestand.txt'??
Guest
#741874
Nur ein Beispiel für Dein Denglish:
>but is there really no experts who can give me some hints or tips?
but are there..
I don't speak German language. I am from Holland and use English as international language. If you would like to help me, than help me or say nothing. I like to come here because here comes a lot of microcontroller enhtousiasts. And I think on this forum you have a lot of guys who like to help each other and also a lot of guys who have good knowledge about microcontrollers.
Reply
Please log in before posting.