Forum: PCB Design & Technology i need to know your opinion

von Aymen MESSAOUDI (Guest)

Attached files:

Rate this post
not useful

i need your help to know the risk of this definition of the thermal pad

thank you in advance

von mse2 (Guest)

Rate this post
not useful
Green is solder stop, yellow is solder stop on copper, gray is paste, 
What I don't like is the solder stop mask overlapping some vias.
I wouldn't do this, even if (and that's we can't see here) the thermal 
pad of the part doesn't overlap.

von Wühlhase (Guest)

Rate this post
not useful
There is enough space to place the vias outside the pad, and connect 
them with some tracks. Why you don't so?

And what does the datasheet recommand?


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.