Forum: µC & Digital Electronics Resistance AMC navigenio c8000

von Rocholus (Guest)

Rate this post
not useful
Hello, attached image of an electronic board AMC navigenio C8000, it 
lacks a resistance (see marks on image), someone knows what is the value 
of that resistance? This would be grate help, Thank you so much.

von r0bm (Guest)

Rate this post
not useful
Have you tried doing a little reverse engineering? The circuit doesn't 
seem to be to complex. Depending where the resistor is located in the 
schematic, you could apply some educated guess to get the right value.

von Jose Antonio L. (rocholus)

Rate this post
not useful
Thank you very much for your help, but I am not a professional engineer. 
I have no knowledge of electronics. I usually repair mechanical 
elements, so I need to know specifically what the value of that 
resistance is to be able to repair this plate. Anyway, thank you :)


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.