Forum: DSP complex signals over usb

von Sddfds S. (sddfds)

Rate this post
not useful
hello i would like to ask how to transmit a complex signal 
exp^{I*omega*T}, I=sqrt(-1), over usb. thanks very much.

von W.S. (Guest)

Rate this post
not useful
There is no transport of complex signals over USB.
Use instead one of the possible transport methods, for example text 
transport by virtual COM port or some HID protocol.

von HFman (Guest)

Rate this post
not useful

i believe the threadowner means USB as Upper Side Band and not USB as
Universal Serial Bus.


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.