Forum: µC & Digital Electronics how to flash/ update STM32 S76G firmware

von Variomaster (Guest)

Rate this post
not useful
I would like to ask for some help or advice to fix the below:

I want to flash/ update the firmware (.dfu file) of my LILYGO TTGO 
T-Motion/softRF Dongle which runs on STM32 S76G Lora Chip by using DfuSe 

Unfortunately the device is recognized as “STM32 BOOTLOADER” in Windows 
device manager instead as “STM Device in DFU Mode”

What can I do to get this dongle identified correctly? So it becomes 
visible in DfuSe Demo?

Thanks a lot!


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.