EmbDev.net

Forum: µC & Digital Electronics XBEE3 Home Automation


von Jens R. (Company: esolutions GmbH) (jens_r38)


Attached files:

Rate this post
0 useful
not useful
[[XBEE3 Home Automation]]

Hi there,

Now that a huge selection of ZigBee products is available on the market, 
I have expanded the following setup:

1. Raspberry PI 3 with raspbee (Dresden Electronics)
   https://phoscon.de/de/raspbee

2. A couple of IKEA Zigbee lamps, switches and range extenders

3. The Digi XBEE3 kit

So, the whole thing works well, but now comes the fun part:

Now I want to integrate my own electronics with XBEE modules, so far I 
have managed to pair the XBEEs with the Raspberry.

I have already downloaded the documentary from the ZigBee Alliance and 
am already implementing the entire boilerplate.

Scan, LQI is already working.

I am missing a tutorial that shows the sequences so that you can start 
systematically here.

I already have:
- Looked at the Arduino HA example. This is old and messy code ....
https://gist.github.com/bgentry/6e4f7840b22c9743640ca38ade6a844a

Maybe someone already has something useful going on:

The LowLevel API on the ATMega1284 is already running (no art ...)
Now I have ported the code to Linux because it makes debugging a lot 
easier.

Best regards
Jens Riebold

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]




Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.