EmbDev.net

Forum: PCB Design & Technology Estimated cost of high volume PCB testing


von Max Stell (Guest)


Rate this post
0 useful
not useful
I am looking for a rough estimate (rule of thumb) for the costs of high 
volume PCB testing. The boards are very small and portable, because they 
are going to be wearable. It would be helpful if you could provide an 
estimate for testing costs per hour for such boards. I don't take into 
consideration that there are costs upfront for software and fixtures 
etc, I just want to know a rough estimate of what testing will cost per 
hour.


Board specs:
-quantity: 10k+
-method: SMD only
-pins per board: ~105
-board size: 30mm²
-double sided soldering

von Falk (Guest)


Rate this post
0 useful
not useful
Soso, und auch schon wieder ein anderer Name?

Beitrag "Grobe Kostenabschätzung PCB-bestückung"

von Max Stell (Guest)


Rate this post
0 useful
not useful
Falk wrote:
> Soso, und auch schon wieder ein anderer Name?
>
> Beitrag "Grobe Kostenabschätzung PCB-bestückung"

I'm looking for 2 different things in the 2 questions. Didn't change my 
name, just didn't log in

von Michael B. (laberkopp)


Rate this post
0 useful
not useful
Gibt es nicht weil STARK abhängig von der Funktion,
die du NATÜRLICH meinst, nicht nennen zu müssen.

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]




Bild automatisch verkleinern, falls nötig