EmbDev.net

Forum: µC & Digital Electronics ATMEL-ICE Basic + AVR Studio 7 + ATMEGA8L-8PU


Author: Winfried B. (Company: BabIdSoft) (winfriedb)
Posted on:

Rate this post
0 useful
not useful
Hello.

I have a circuit with the ATMEGA8L-8PU that I want to debug.
The ATMEGA8L-8PU is not in the device selection of AVR Studio 7. I have 
the ATMEGA 8, ATMEGA88A and ATMEGA88P. I connected the controller via 
the 6-pin connector.
Debugging does not work over ISP and debugwire makes a mistake. What can 
I choose for a controller to work?

Best regards
Winfried

Author: Rudolph (Guest)
Posted on:

Rate this post
0 useful
not useful
The ATMega8 does not feature Debug-Wire but the ATMega88 does.

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]




Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.