Forum: FPGA, VHDL & Verilog Reading .pof from fpga

von Hareesh M. (Company: Mindteck) (hareeshp)

Rate this post
0 useful
not useful

i have a cyclone iv (ep4ce55) based board in which epcs64 is used as a 
configuration device. i need to get the .pof file from the board using 
the quartus software. In the quartus we have the facility to read the 
.pof file from the fpga using 'examine' procedure. But when connect the 
board into pc and check for the .pof file it is showing failed.


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [vhdl]VHDL code[/vhdl]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.