Forum: µC & Digital Electronics Problems programming the CC3200 via LaunchPad

von Christopher H. (Guest)

Attached files:

Rate this post
0 useful
not useful
Hi everybody,

I try to program a custom CC3200 application using an excisting 
CC3200LaunchPad. First of all, I just connected the UART pins from the 
LaunchPad to the required pins on the CC3200 and tried to get a 
connection using the Uniflash tool. But it is not possible to get any 
connection to the processor.

The circuit diagram is set up, as required by TI and the battery 
connection is checked, as well ! Only detected problem is that there is 
no voltage on pins number 9 and 48.

It would be great, if anybody has got an idea what the problem could be 


Attached, please find the circuit diagram.


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.