Hello, I recently bought a dev board with a Cyclone II EP2C8T144C8N FPGA onboard. It is marked 'ACB2CA v1.2' on the reverse. Unfortunately the seller did not include any information. It has a row of 20x2 Pins down each side of the board but has no pin numbering. I wonder if anyone has a schematic or has worked out the pin numbering?
Guest
#4063514
Hello again, Can you upload two pictures of dev board here to upload (sharpen front- and backside and frame filled please)? Then maybe an identification is possible. Did you ever used google picture search?
Hi, Here are a couple of quick Photos from my mobile phone.. Thank you.
Attached files:
-
20150323_125027.jpg
(230 KB)
-
20150323_125040.jpg
(240 KB)
Guest
#4063598
Please look here: http://www.wayengineer.com/digiasic-fpga-altera-ep2c5t144-core-board-p-161.html#.VRAS5OG2VTs Download Link down on page is dead, but here is an email adress top on page (service@wayengineer.com). Good luck to you.
What a star man..that worked a treat and the nice people at wayengineer were so helpful..got the schematic but couldnt get my project working...until I realised the 50Mhz clock in was on pin 88 not pin 17 as the EP2C5 dev boards. All working fine now..Thanks for your help..
Reply
Please log in before posting.