EmbDev.net

Forum: µC & Digital Electronics Fusebyte to program with PonyProg


von cobramostar (Guest)


Attached files:

Rate this post
useful
not useful
Fusebyte to program with PonyProg are
SUT1
CKSEL1

but i have stk 500
this is some with

avrdude -c stk500 -p t2313 -U lfuse:w:0xdd:m -U hfuse:w:0xff:m -U 
efuse:w:0xff:m

PonyProg SUT1 CKSEL1 = stk 500 low dd , high ff and Extended ff ?


by

: Moved by Admin
von cobramostar (Guest)


Rate this post
useful
not useful
ob gibt es ein Konverter

Ponyprog2000 fuse verändert in STK500 fuse  ? ? ?


Fusebyte to program with PonyProg are
SUT1
CKSEL1


thanx  ! ! !

von Matthias S. (Company: matzetronics) (mschoeldgen)


Rate this post
useful
not useful
Try one of the zillion fusebyte calculators on the net. Here's one of 
them:
http://www.engbedded.com/fusecalc
Here comes another one:
http://eleccelerator.com/fusecalc/
That should help you - remember to set your device before entering your 
desired setting as the AVRs differ in their capabilities.

von cobramostar (Guest)


Rate this post
useful
not useful
that but I do not know who sent byt pony program in this configuration
"Fusebyte this program with PonyProg are
SUT1
CKSEL1 "

to turn and byt with calculator for socket 500
I would have to know what is sent PonyProg

but I dont know what is sent PonyProg
and then I do not know who to turn byt

Please log in before posting. Registration is free and takes only a minute.
Existing account
Do you have a Google/GoogleMail account? No registration required!
Log in with Google account
No account? Register here.