Forum: FPGA, VHDL & Verilog Choice of Hardware

von Sunayana C. (sunayana_c)

Attached files:

Rate this post
0 useful
not useful
Hello All,

I intend to design a SATA device controller on Xilinx FPGA.
My specifications are as follows

1) It should be a higher version of the FPGA
2) It should not contain FMC connectors
3) It should be from Xilinx
4) We do not use a PCI/ PXI.. Its the normal computer.
5) It should have rocket I/O MGT transciever and the SATA should be both 
on the host n device side. SATA version 1 and 2 need to be implemented 

I have attached a scanned copy of my project block diagram and what we 
intend to do.
Kindly suggest me the model number, cost of the devices ASAP.
Please suggest me the model numbers and if you have sample programming 
techniques kindly refer them to me.


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [vhdl]VHDL code[/vhdl]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.