STM32 stop mode wake via usart

R3n3 Guest #2019319
Rate this post
• ▲ useful
▼ not useful 
The stm32 MCU wakes up with the internal 8Mhz oscilator and it takes 
some time to switch on HSE.

Due to project-planning issues, does anyone know if it's possible to set 
a stm32 MCU in stop mode and force a wakeup via USART without loosing 
the first data byte(s) of the transmitted USART data?


see also: 
https://my.st.com/public/STe2ecommunities/mcu/Lists/ARM%20CortexM3%20STM32/Flat.aspx?RootFolder=%2Fpublic%2FSTe2ecommunities%2Fmcu%2FLists%2FARM%20CortexM3%20STM32%2Fwake%20up%20from%20stop%20mode%20on%20usart%20interrupt%20do%20I%20need%20to%20configure%20EXTI&FolderCTID=0x01200200770978C69A1141439FE559EB459D758000626BE2B829C32145B9EB5739142DC17E&currentviews=333
Reply Quote Edit Move Thread sperren Anmeldepflicht aktivieren Anpinnen Delete topic Thread mit anderem zusammenführen Report post
Watch this topic

Reply

Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.

Formatting
  • [c]C-Code[/c]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]
  • [[Title]] – link to an article
  • Link to another post: right-click its post ID (#8078628), copy the address, paste it into the text

More about formatting

Post long source code as an attachment, not in the text.

Your name and e-mail address

Already registered? Log in

Not shown to anyone. We send you a link; your post appears once you confirm it there.

By submitting you create a free account and accept the terms of use.