Forum: ARM programming with GCC/GNU tools Compile Module for Atmel ARM920T

von Michael Schmid (Guest)

Rate this post
0 useful
not useful

I have the following system:
- Target System: Atmel ARM920T with Linux 2.6.14
- My computer (where I compile the software): Ubuntu 9.04 / 
Crosscompiler: arm-linux-gcc-3.3.2

I successfully installed the crosscompiler and I'm also able to compile 
and run a "HelloWorld" on my target system

Now I want to learn about dynamically loaded modules (with insmod). So I 
want to make a module for my target system.

I heard a lot about the kernel source-code tree which is necessary to 
build a module from kernel 2.6.x on... But what do I really have to do?

Do you have some good tutorials and an example what I have to do for my 


von Michael Schmid (Guest)

Rate this post
0 useful
not useful
Sorry... I have a AT91RM9200 with a ARM920T included :-)


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.