Search results for ""FT2232H""

Controlling a linear CCD with FPGA

this aim I picked Toshiba TCD1304 CCD detector, Terasic DE0 Nano board with Altera Cyclone IV and FT2232H Mini Module from FTDI. The basic operation flow should be like this: 1- Generate the three clock signals which are required by CCD (I have done this) 2- Use the onboard ADC of DE0 Nano for to

will be able to read and write it to the board's RAM. And after that I already know how to use the FT2232H Mini Module with DE0 Nano. I use Quartus II and Verilog by the way. Any suggestion, link or example would be greatly appriciated. Thanks...

FPGA, VHDL & Verilog ·Murat GUNES ·2013-08-21 23:20 ·4 Replies

FT2232H in FT245 FIFO Mode - burst not working

Hi! I am trying to burst data out of my Cyclone II via a FTDI FT2232H -Chip in FT245 FIFO mode (see FT245_fifo.png) as described in the FTDI Application Node 130 (see burst.png): [c]A write operation can be started when TXE# is low. WR# is brought low when the data

yet as well. does anyone have a working example/design that can actually burst data through the ft2232h?

FPGA, VHDL & Verilog ·Thomas L. ·2011-07-21 02:33 ·4 Replies

Low Cost FPGA Development Board

peters mentioned, one of the advantages of posedge over papilio-pro is the interface between fpga and ft2232h which allows a high speed (10MB/s) usb connection between host and fpga.

FPGA, VHDL & Verilog ·Abolfazl ·2015-12-03 11:59 ·7 Replies

OpenHR20: Firmware for Honeywell Rondostat HR20E

spent the weekend testing 3 devices of above type. Since I'm on Linux and own only a generic FT2232H JTAG interface (Olimex ARM-USB-OCD-H), I had trouble flashing the firmware: avrdude didn't work, since the built-in FT2232HIO driver works in ISP-Mode only (and I didn't want to solder each device

µC & Digital Electronics ·Mario Fischer ·2022-11-26 13:30 ·1121 Replies