Search results for "STM32"

File

stm32f4xx_spi.c

**** */ /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_spi.h" #include "stm32f4xx_rcc.h" /** @addtogroup STM32F4xx_StdPeriph_Driver * @{ */ /** @defgroup SPI * @brief SPI driver modules * @{ */ /* Private typedef ----------------------------------

in „GCC Optimierung killt Funktion“ · Mikrocontroller und Digitale Elektronik · 2016-01-21 17:51

Article

UART auf USB

Implementierung von USB->UART Adaptern auf Basis USB-fähiger Mikrocontroller: Beispiel von W.S. im Forum Die STM32Cube-Bibliotheken für die STM32-Mikrocontroller enthalten USB-CDC-Beispiele. Tutorial zur Implementierung eines 3-Fach USB-Serial-Adapter mit STM32F103 und CDC sonstige/unbekannt. Das Nokia CA-42 USB

Article ·2018-01-05 14:41

File

STM32H743ZI_FLASH.ld

/* ***************************************************************************** ** ** File : stm32_flash.ld ** ** Abstract : Linker script for STM32H743ZI Device with ** 2048KByte FLASH, 1056KByte RAM ** ** Set heap size, stack size and stack location according ** to application requirements. ** ** Set memory bank area and size if external memory is used. ** ** Target : STMicroelectronics STM32 ** ** Environment : Atollic TrueSTUDIO(R) ** ** Distribution: The file is distributed as is, without any warranty ** of any kind. ** ** (c)Copyright Atollic AB. ** You may use this file as-is or modify

in „Wie speichere ich große Arrays in STM32?“ · Mikrocontroller und Digitale Elektronik · 2019-10-03 16:47

File

smcattach.c

#include "stm32f0xx.h" #include "stm32f0308_Discovery.h" #define in0 GPIO_Pin_0 #define in1 GPIO_Pin_1 #define in2 GPIO_Pin_2 #define in3 GPIO_Pin_3 #define in4 GPIO_Pin_4 #define in5 GPIO_Pin_5 #define in_GPIO GPIOA

in „mapping the exact input to the output“ · µC & Digital Electronics · 2015-09-30 15:50

File

pwm.c

#include "stm32f1xx.h" #include "stm32f1xx_hal.h" uint32_t data[2] = {0x111111, 0x111111}; //uint32_t data[2] = {0xFF0000, 0x0000FF}; //uint32_t data[2] = { 0x0000FF, 0xFF0000}; //uint32_t data[2] = { 0x555555, 0x555555}; // alternating bits volatile uint32_t bitcount = 0; volatile uint32_t pixelcount = 0; volatile uint32_t output = 0 ; void NextBit() { TIM2->CCR1 = output; // make it the first in the interrupt, then calculate the next bit uint32_t mask

in „STM32 Changing PWM Duty Cycle in interrupt handler“ · µC & Digital Electronics · 2017-04-10 16:56

Thread

what is difference between arm-elf and arm-eabi?

Codesourcery package has been the only one which offered Cortex-M3 support and AFAIK Ride supports STM32 too. Just speculation, I have never used the Ride tools. I don't know "Sarm" so I can not comment on it at all. > All others would fail in different > ways. You did not write the error-messages

Codesourcery package has been the only one which > offered Cortex-M3 support and AFAIK Ride supports STM32 too. Just > speculation, I have never used the Ride tools. I don't know "Sarm" so I > can not comment on it at all. > I can tell you ride use the codesoucery toolchain as delivered. sarm is

µC & Digital Electronics ·Dan Miller ·2008-05-27 20:01 ·9 Replies

File

eeprom.c

*/ #include <stdbool.h> #include <stdio.h> #include <stdint.h> // StdPeriph Lib + CMSIS #include <stm32f4xx.h> #include <stm32f4xx_i2c.h> #include "eeprom.h" /* ------------- DEFINES ------------------ */ // Timeout und E2PROM Adresse #define I2C_TIMEOUT_MAX 10000 #define MEM_DEVICE_WRITE_ADDR 0xA0

in „Organisation der Header und Includes“ · Mikrocontroller und Digitale Elektronik · 2016-01-01 21:37

Article

Mikrocontroller

ausführliche Beschreibung der Entscheidungskriterien gibt es auf der Seite Entscheidung Mikrocontroller sowie STM32 für Einsteiger Verbreitete Mikrocontrollerfamilien. 1 Bit MC14500B (Motorola, historisch!) 4 Bit MARC4 (Atmel) SM62 (Epson) 8 Bit MicroConverter® (Analog Devices) AVR (Atmel) PIC (Microchip) 8048

XMCxxxx (Infineon) ARM-Core (im Hobbybereich schwerer beschaffbar) SuperH (Renesas, früher Hitachi) STM32 (STMicroelectronics) ARM Cortex M-Core FR50 (Fujitsu) EFM32 (Energy Micro) ARM Cortex M-Core Links. Podcast CRE67 Mikrocontroller bei Chaosradio Express 36th annual EDN microprocessor/microcontroller

Article ·2016-09-14 12:31

Thread

[HOW TO] Interface an SD XC 64GB Card Class 10 Locked

access the card's file structure and allocation tables. E.g. to access a card formatted with the FAT32 filesystem you could look into FatFS by Elm Chan, which is available to AVR controllers and the STM32 series of MC. Its probably easy to port to other architectures: http://elm-chan.org/fsw/ff/00index_e.html

volts and will be toasted when using 5 volts. Ginat volumes like 64 GBytes might not work with FAT32, i didn't look into that yet. Found some info here: http://www.ntfs.com/ntfs_vs_fat.htm It seems that 32 GBytes for a volume might be a limit here.

Analog Circuits ·Brian ·2015-01-13 07:11 ·5 Replies

Thread

GNU Toolchain: Program working in simulation, but not on target

target, the entry address (PC after reset) and the stackpointer are completely wrong. I am using a STM32F107VC (Cortex-M3). Here is the output of readelf: [code] $ arm-none-eabi-readelf.exe -S project.elf There are 18 section headers, starting at offset 0x3884c: Section Headers: [Nr] Name

Try do transfer the code with the STM32 bootloader, for example with the flash loader demonstrator available from st.com. If it works there is a problem with the programming-settings in the IDE (model, flash-programming-algorithm, memory-regions

µC & Digital Electronics ·Marco ·2010-09-04 10:33 ·1 Replies

File

smcfor.c

#include "stm32f0xx.h" #include "stm32f0308_Discovery.h" #define in0 GPIO_Pin_0 #define in1 GPIO_Pin_1 #define in2 GPIO_Pin_2 #define in3 GPIO_Pin_3 #define in4 GPIO_Pin_4 #define in5 GPIO_Pin_5 #define in_GPIO GPIOA

in „i want to map in0 to out0“ · µC & Digital Electronics · 2015-09-29 10:03

File

smcfor.c

#include "stm32f0xx.h" #include "stm32f0308_Discovery.h" #define in0 GPIO_Pin_0 #define in1 GPIO_Pin_1 #define in2 GPIO_Pin_2 #define in3 GPIO_Pin_3 #define in4 GPIO_Pin_4 #define in5 GPIO_Pin_5 #define in_GPIO GPIOA

in „i want to map in0 to out0“ · µC & Digital Electronics · 2015-09-29 14:56

File

config.h

CONFIG_H_INCLUDED #define CONFIG_H_INCLUDED #include <stdbool.h> #include <stdint.h> #include "tm_stm32f4_bmp180.h" #include "tm_stm32f4_rtc.h" // Typdefinition diverser RAM Typen, Verwendung <Typ> <CCRAM> <Variablenname> #define CCRAM __attribute__((section(".ccram"))) #define BKRAM __attribute__((

in „Organisation der Header und Includes“ · Mikrocontroller und Digitale Elektronik · 2015-12-23 11:05

File

config.h

stdbool.h> #include <stdint.h> /* --------------- Special Include Files / Librarys ------ */ #include "tm_stm32f4_bmp180.h" #include "tm_stm32f4_rtc.h" /* -------------- Projekt Include Files ---------------- */ /* -------------- Defintionen ---------------------------- */ // Typdefinition diverser RAM Typen

in „Organisation der Header und Includes“ · Mikrocontroller und Digitale Elektronik · 2016-01-01 21:37

File

STM32F746ZGTX_RAM.ld

********************************************** * @file LinkerScript.ld * @author Auto-generated by STM32CubeIDE * Abstract : Linker script for NUCLEO-F746ZG Board embedding STM32F746ZGTx Device from stm32f7 series * 1024Kbytes FLASH * 320Kbytes RAM * * Set heap size, stack size and stack location according

in „Startup code für STM32 C und C++ mix.“ · Mikrocontroller und Digitale Elektronik · 2021-07-01 17:53

File

STM32F746ZGTX_FLASH.ld

********************************************** * @file LinkerScript.ld * @author Auto-generated by STM32CubeIDE * Abstract : Linker script for NUCLEO-F746ZG Board embedding STM32F746ZGTx Device from stm32f7 series * 1024Kbytes FLASH * 320Kbytes RAM * * Set heap size, stack size and stack location according

in „Startup code für STM32 C und C++ mix.“ · Mikrocontroller und Digitale Elektronik · 2021-07-01 17:53

File

eeprom.c

*/ #include <stdbool.h> #include <stdio.h> #include <stdint.h> // StdPeriph Lib + CMSIS #include <stm32f4xx.h> #include <stm32f4xx_i2c.h> #include "eeprom.h" /* ------------- DEFINES ------------------ */ #define E2P_DATA_VALID 0xaf // Kennung für gültige Daten #define E2P_DV_ADR 0xffff // Adresse der

in „GCC Optimierung killt Funktion“ · Mikrocontroller und Digitale Elektronik · 2016-01-26 07:11

File

STM32F10x_COMMON.ld

/* Common part of the linker scripts for STM32 devices Copyright RAISONANCE 2009 You can use, modify and distribute this file freely, but without any waranty. */ /* default stack sizes. These are used by the startup in order to allocate stacks

in „Anfänger Linkerscipt Problem“ · Mikrocontroller und Digitale Elektronik · 2010-03-11 16:20

File

stm32f10x_ram.ld

/*********************************************************************************** * * stm32f10x_flash.ld - linker script include for nutos on cotrex-m3 STM32F series * ***********************************************************************************/ /* PROVIDE (__heap_start = _sheap);

in „Linker Frage: ROM Layout by "Run in SRAM"“ · Mikrocontroller und Digitale Elektronik · 2012-01-31 17:09

File

STM32F207IG_FLASH.ld

/* ***************************************************************************** ** ** File : stm32_flash.ld ** ** Abstract : Linker script for STM32F207IG Device with ** 1024KByte FLASH, 128KByte RAM ** ** Set heap size, stack size and stack location according ** to application requirements. ** ** Set memory bank area and size if external memory is used. ** ** Target : STMicroelectronics STM32 ** ** Environment : Atollic TrueSTUDIO(R) ** ** Distribution: The file is distributed as is, without any warranty ** of any kind. ** ** (c)Copyright Atollic AB. ** You may use this file as-is or modify

in „STM3240G-EVAL Beispielprogramm“ · Mikrocontroller und Digitale Elektronik · 2012-10-29 17:09

File

startup_stm32f0xx.S

/* File: startup_ARMCM0.S * Purpose: startup file for Cortex-M0 devices. Should use with * GCC for ARM Embedded Processors * Version: V1.3 * Date: 08 Feb 2012 * * Copyright (c) 2012, ARM Limited * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following

in „[ARM] em::blocks StartupCode und Linker Script“ · Mikrocontroller und Digitale Elektronik · 2014-02-24 09:46

File

startup_stm32f4xx.c

/** ****************************************************************************** * @file startup_stm32f4xx.s * @author Coocox * @version V1.0 * @date 03/05/2012 * @brief STM32F4xx Devices vector table for RIDE7 toolchain. * This module performs: * - Set the initial SP * - Set the initial PC == Reset_Handler

in „GCC STM32F4 -> Wie Variablen auf RAM bereiche verteilen“ · Mikrocontroller und Digitale Elektronik · 2015-02-21 00:47

File

startup_stm32f103xb.s

/** *************** (C) COPYRIGHT 2017 STMicroelectronics ************************ * @file startup_stm32f103xb.s * @author MCD Application Team * @version V4.2.0 * @date 31-March-2017 * @brief STM32F103xB Devices vector table for Atollic toolchain. * This module performs: * - Set the initial SP * - Set

in „arm-none-eabi Problem.“ · Mikrocontroller und Digitale Elektronik · 2019-04-18 11:11

File

stm32f4xx_ram.ld

********************************************* * History: * * 03.06.2012 mifi First Version for the stm32f407ig, based on an * example from the CMSIS packages of ARM. * 27.12.2012 mifi Tested with STM32F4-Discovery too. * 16.02.2013 mifi Align bss and heap too. ****************************************

in „ARM - Probleme mit sprintf (Linkerfehler)“ · Mikrocontroller und Digitale Elektronik · 2015-05-04 10:30

File

stm32f407ve_ram.ld

MEMORY { ram (rwx) : ORIGIN = 0x20000000, LENGTH = 128K bkpram (rw) : ORIGIN = 0x40024000, LENGTH = 4K ccmram (rwx) : ORIGIN = 0x10000000, LENGTH = 64K } SECTIONS { .text : { . = ALIGN(4); KEEP(*(.vectors*)) *(.text*) *(.rodata) *(.rodata*) . = ALIGN(4); } > ram /* exception unwinding information */ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } > ram /* index entries for section unwinding */ .ARM.exidx : { __exidx_start = .; *(.ARM.exidx* .gnu.linkonce.armexidx.*) __exidx_end = .; } > ram _etext = .; .data : AT (_etext) { . = ALIGN(4); _sdata = .; *(.data*) . = ALIGN(4); _edata = .;

in „Linker entfernt Symbole?!“ · Mikrocontroller und Digitale Elektronik · 2021-05-16 17:23

File

startup_stm32f746zgtx.s

/** ****************************************************************************** * @file startup_stm32f746xx.s * @author MCD Application Team * @brief STM32F746xx Devices vector table for GCC based toolchain. * This module performs: * - Set the initial SP * - Set the initial PC == Reset_Handler, *

in „Startup code für STM32 C und C++ mix.“ · Mikrocontroller und Digitale Elektronik · 2021-07-01 17:52

File

stm32f407vg_flash.ld

--------------------------------------------- * Linker script for running in internal FLASH on the STM32F407VG *----------------------------------------------------------------------------*/ OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") OUTPUT_ARCH(arm) SEARCH_DIR(.) /* Memory

in „STm32Fxxx: Kleiner Gefallen vom einem Profi erbeten“ · Mikrocontroller und Digitale Elektronik · 2015-11-20 22:34

File

stm32f407vg_flash.ld

--------------------------------------------- * Linker script for running in internal FLASH on the STM32F407VG *----------------------------------------------------------------------------*/ OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") OUTPUT_ARCH(arm) SEARCH_DIR(.) /* Memory

in „STM32F407: Stack ins CCRAM gelegt erzeugt Hard Fault Error“ · Mikrocontroller und Digitale Elektronik · 2016-02-14 22:16

File

STM32F407VGTx_FLASH.ld

********************************** ** ** File : LinkerScript.ld ** ** Abstract : Linker script for STM32F407VGTx Device with ** 1024KByte FLASH, 128KByte RAM ** ** Set heap size, stack size and stack location according ** to application requirements. ** ** Set memory bank area and size if external memory is used. ** ** Target : STMicroelectronics STM32 ** ** ** Distribution: The file is distributed as is, without any warranty ** of any kind. ** ***************************************************************************** ** @attention ** ** <h2>

in „ARM, GCC, Linker-Skripts“ · Mikrocontroller und Digitale Elektronik · 2016-07-20 09:33

File

STM32H743ZI_FLASH.ld

/* ***************************************************************************** ** ** File : stm32_flash.ld ** ** Abstract : Linker script for STM32H743ZI Device with ** 2048KByte FLASH, 1056KByte RAM ** ** Set heap size, stack size and stack location according ** to application requirements. ** ** Set memory bank area and size if external memory is used. ** ** Target : STMicroelectronics STM32 ** ** Environment : Atollic TrueSTUDIO(R) ** ** Distribution: The file is distributed as is, without any warranty ** of any kind. ** ** (c)Copyright Atollic AB. ** You may use this file as-is or modify

in „Wie speichere ich große Arrays in STM32?“ · Mikrocontroller und Digitale Elektronik · 2019-09-30 21:25

File

startup_stm32f0xx.s

/** ****************************************************************************** * @file startup_stm32f0xx.s * @author MCD Application Team * @version V1.2.0 * @date 31-July-2013 * @brief STM32F0xx Medium-density devices vector table for RIDE7 toolchain. * This module performs: * - Set the initial

in „Startup: Funktion vor Konstruktoren aufrufen?“ · Mikrocontroller und Digitale Elektronik · 2014-08-05 14:06

File

STM32F407VGTx_FLASH.ld

********************************** ** ** File : LinkerScript.ld ** ** Abstract : Linker script for STM32F407VGTx Device with ** 1024KByte FLASH, 128KByte RAM ** ** Set heap size, stack size and stack location according ** to application requirements. ** ** Set memory bank area and size if external memory is used. ** ** Target : STMicroelectronics STM32 ** ** ** Distribution: The file is distributed as is, without any warranty ** of any kind. ** ***************************************************************************** ** @attention ** ** <h2>

in „STM32F4 - LinkerScript - Ac6 System Workbench“ · Mikrocontroller und Digitale Elektronik · 2016-11-19 11:36

File

arm-gcc-link_-_Kopie.ld

/* ***************************************************************************** ** ** File : stm32_flash.ld ** ** Abstract : Linker script for STM32F407VG Device with ** 1024KByte FLASH, 192KByte RAM ** ** Set heap size, stack size and stack location according ** to application requirements. ** ** Set memory bank area and size if external memory is used. ** ** Target : STMicroelectronics STM32 ** ** Environment : Atollic TrueSTUDIO(R) ** ** Distribution: The file is distributed as is, without any warranty ** of any kind. ** ** (c)Copyright Atollic AB. ** You may use this file as-is or modify

in „Hardfault-Interrupt bei malloc wenn kein Speicher verfügbar“ · Mikrocontroller und Digitale Elektronik · 2015-01-16 17:22

Thread

Device drivers and ARM learning

cores are embedded in micros from various manufacturers, like Atmel (AT91SAM, AT92RM), NXP (LPC2xxx), STM (STR9, STM32) and others. On the smaller, ARM7-based variants a full OS can not be run due to memory restrictions mostly. But they are cheap and easily available if you can live with using a RTOS,

µC & Digital Electronics ·Robert Swills ·2010-03-29 14:42 ·2 Replies

Thread

Control ARM prologue/epilogue assembly code emission

The Cortex-M4F (ARMv7M) does not have an explicit PUSH instruction, but only "STM". Verify that you call the compiler correctly for that core (flags -mcpu=cortex=M4 -mthumb). Paste the disassembly, step through the instructions with a debugger and explain why you believe that the

with an other mikrocontroller? Maybe that one is defect... This should definitely work (it does on my STM32F4 which is a Cortex-M4, too - i.e. has exactly the same core). I don't think GCC can be stopped from generating the "PUSH" instruction because it should work.

µC & Digital Electronics ·Albert Hong ·2013-09-24 21:14 ·6 Replies

File

CRC.cpp

#include "CRC.hpp" #include <stm32f4xx_crc.h> #include "Constants.hpp" #include "App.hpp" TZApp::CCrc Crc; //------------------------------------------------------------------------------ TZApp::CCrc::CCrc(void) { } /** Berechnet die

in „Problem mit GCC-Optimierung“ · Mikrocontroller und Digitale Elektronik · 2013-12-02 16:43

Thread

Atmel announces ARM Cortex-M3 based Controllers

Star from Freescale) 16 bit and it is still used engine (max 2 cyl) and may leave room for more cheap 32bit. I admit I am not a very good connoisseur of ARM using for hobby now PIC24H (due to good price/performance) but for next year for sure I will happly go to 32bit core, ARM Cortex M3 or MIPS depending

different manufacturers have differences, take the frequency for example, nxp lpc1700 is up to 100MHz, ST STM32F103ZE is 72MHz and Atmel AT91SAM3U is 96MHz. Meanwhile, they incorporate various peripherals, although most of them are the same. Before you choose these processors for your project, you shall evaluate

µC & Digital Electronics ·Andreas S. ·2010-01-08 08:57 ·4 Replies

File

trampoline.c

* SUCH DAMAGE. * * For additional information see http://www.ethernut.de/ * */ #include <arch/cm3/stm/stm32xxxx.h> #include <arch/cm3/cortex_interrupt.h> #include <arch/cm3/core_cmFunc.h> #ifndef MSP_STACK_SIZE #define MSP_STACK_SIZE 128 #endif /*! * \brief CortexM3 MSP processor stack. */ __attribute__ ((section(".stack"))) volatile static uint32_t mspStack[MSP_STACK_SIZE]; static void IntDefaultHandler(void *arg) __attribute__ ((naked)); void TrampolineInit(void *arg) __attribute__ ((naked)); #ifndef NUT_BOOT_FUNCTION #define NUT_BOOT_FUNCTION

in „Linker Frage: ROM Layout by "Run in SRAM"“ · Mikrocontroller und Digitale Elektronik · 2012-01-31 17:08

Article

MP3

und -Decoder (nur Binary), Filtern, Converter, Equalizer etc, incl. Dokumentation zur Verwendung auf STM32F4 und STM32F7. Für den Download ist eine Registrierung bei ST erforderlich: X-Cube-AUDIO OGG Vorbis-Decoder in Software. Für OGG Vorbis existiert mit Tremor ein u.a. für ARM optimierter Decoder, der

Reichelt gekauft werden, hier ist die Homepage. unterstützte Sampleraten: 8/11.025/12/16/22.05/24/32/44.1/48 kHz 24 Bit DAC Ausgang, 90dB Dynamikbereich, 85dB SNR Volle Unterstützung für FAT16, FAT32 Dateisystem, maximal 32GB SD-Karte, 32G USB Stick, 64MB NORFLASH verschiedene Kontrollmodi, I/O, Seriell

Article ·2022-05-07 07:50

File

tools.c

/* -------------- System Include Files ------------------- */ #include "stm32f10x_conf.h" #include "system_stm32f10x.h" /* -------------- Standard Include Files ---------------- */ #include <stdbool.h> #include <stdint.h> #include <stdio.h> #include <stdlib.h> /* ----------

in „Umgang mit globalen Datenstrukturen“ · Mikrocontroller und Digitale Elektronik · 2019-10-12 18:55

Thread

putting newlibs stub into a static library

When i do that, i get the typical undefined references. My link order is arm-none-eabi-g++ -T"../stm32-128k-20k.ld" {lots of object files} -o"output.elf" -lstm32-md No other librarys are getting linked in.

the libraries explicitly in the required order should I think fix the problem: -lm -lc -lgcc -lstm32-md You may find that you need grouping: --start-group -lm -lc -lgcc -lstm32-md --end-group or its shorter alternative form: -( -lm -lc -lgcc -lstm32-md -) This causes the libraries in

µC & Digital Electronics ·Benjamin Sonnemann ·2009-04-20 22:46 ·1 Replies

Thread

Which ARM Chip? for Autopilot Hardware

STM32F4

Devkit1270, sounds be based on STSTM32F207IGT6, it is based on ARM-Cortex M3 processor. may be help you.

µC & Digital Electronics ·Philipp Maricek ·2011-11-01 04:33 ·3 Replies

Thread

launchpad gcc for ARM: Understanding linker scripts

Greetings to all, I want to run code from a ram-location on a STM32F407 (Cortex-M4) microcontroller, but before I can do this, I want to understand the linker-commands, and this seems to be a real challenge. At first, I want to find out where some code-fragments

work, I got "bootstart = 0x20000804" and "bootend = 0xaf00b580", superfluouses to mention, that the STM doesn't have so much memory. [code] SECTIONS { . = 0x08000000; bootstart = . ; .text : { ... ... [/code] It's amazing, that the code generated with these linker-scripts

µC & Digital Electronics ·Lauren ·2012-10-02 12:46 ·1 Replies

Article

Reichelt-Wishlist

| * ST ST7MC... (µC für Servosteuerungen, und vor allem Brushless-Motoren) | | | QFP Bausteine der STM32F4 Serie (Cortex-M4) ST STR7 Serie (ARM7TDMI) * TI MSP430F167, TI MSP430F168 * TI MSP430F2001/2/3 etc. im RSA-Gehäuse (=QFN) | * TI MSP430F2618 | TI MSP430FG4618 | TI MSP430G2553IN20 viele MSP430 Gs

Microtune | NetDCU8 von F & S Elektronik Systeme GmbH ( - Linux-Computerplatine mit 400MHz Samsung-ARM mit 32MB RAM, 16MB Flash und SD/Ethernet/CAN/USB/TFT/RS232 für ca. 100 Euro | | * OM5610 FM Tuner-Matchbox von Philips | ST Primer 2 (Experimentierboard fuer ARM Einsteiger) * STM STM3210C-EVAL für <=214,79

Article ·2023-07-05 19:59

File

Fehlermeldung.txt

*, void (*)(void *), int (*)(void *, char *, int *), void *)" cannot be assigned to an entity of obSTM32F207UART.c 117 type "void (*)(obSTM32UART *, void (*)(void *), int (*)(void *, char *, int *), void *)"

in „Fehlermeldung IAR Compiler - Probleme mit Zeiger“ · Mikrocontroller und Digitale Elektronik · 2011-11-25 14:14

File

tools.c

/* -------------- System Include Files ------------------- */ #include "stm32f10x_conf.h" #include "system_stm32f10x.h" /* -------------- Standard Include Files ---------------- */ #include <stdbool.h> #include <stdint.h> #include <stdio.h> #include <stdlib.h> /* ----------

in „Matrix indizierbar machen?“ · Mikrocontroller und Digitale Elektronik · 2019-10-28 11:25

Thread

Relative Jumps Only

impossible. If any questions are left, feel free to ask. Greetings, Lasse PS: Cortex-M3, STM32F103, Codesourcery GCC

µC & Digital Electronics ·Lasse S. ·2010-08-24 10:01 ·13 Replies

Article

WebRadio Clients

Display OpenMCP. AVR ATmega2561 128KB SRAM ENC28J60 VS1011 Shoutcast/ICEcast with infotag supported STM32 Internet Radio. (Chinese) (Chinese) Source Code: ARM Cortex-M3 STM32F10x DM9000A USB Display MP3 + WMA Software Decoding Webradio aus der Codesammlung. AVR ATmega644 VS1053B ENC28J60 MMC/SD-Karte

Article ·2020-02-06 16:42

Thread

connected DIN MIDI Out cable disturbs encoder

Hey, i am currently working on a MIDI related project utilizing a STM32F103 and a Hex Buffer (74HC365). I have the following problem: reading the encoder works fine (handled via interrupts) until i connect a midi cable to the midi out port, then the readings of the encoder

µC & Digital Electronics ·Lutz ·2021-11-07 18:27 ·8 Replies

Article

ARM GCC

übliche Implementierung enthält einen 1-Takt-Multiplizierer Für reduzierte Chipfläche kann auche ein 32-Takt-Multiplizierer ausgewählt werden Um nun bei Multiplikationen mit Konstanten nicht die langsame 32-Takt-Multiplikation zu nutzen kann der Compiler angewiesen werden, dort Shifts oder Ähnliches zu

mitbringen (CodeBench lite und Yagarto werden ohne ausgeliefert, GCC-ARM-Embedded mit). Am Beispiel der STM32F4 mehr dazu in diesem Thread: Floating Pointing Unit STM32F4 Links. Hier finden sich noch ein paar Tipps, für den 1. kann aber mittlerweile der GCC-ARM-Embedded direkt verwendet werden, da er jetzt

Article ·2020-06-05 06:30

Search results for "STM32"

489 results for STM32 Search results for "STM32"

[HOW TO] Interface an SD XC 64GB Card Class 10 Locked

489 results for STM32