Bauteil: FT2232H

Im Forum und im Wiki

• Article

  BusAnalyzer

  20 kBit) Project state. The project is still in its prototyping state. Used Hardware. STM32F103 ( FT2232H ( ARM-USB-OCD Debugger ( Why STM32? - Out of curiosity and because of the low cost DevKit and its good tool support (e.g. free tools, Standard Peripheral Library, CMSIS compliancy). Why FT2232H? -

  could be better. Maybe Qt should be considered as alternative. Hardware (Prototype). Interfacing FT2232H and STM32F103. Both devices are connected using their USART interfaces. A partly handshake is required because otherwise the FT2232H sporadically seems to loose some bytes. The STM32F103 provides

  Article ·2011-11-21 12:49

• Thread

  Controlling a linear CCD with FPGA

  this aim I picked Toshiba TCD1304 CCD detector, Terasic DE0 Nano board with Altera Cyclone IV and FT2232H Mini Module from FTDI. The basic operation flow should be like this: 1- Generate the three clock signals which are required by CCD (I have done this) 2- Use the onboard ADC of DE0 Nano for to

  will be able to read and write it to the board's RAM. And after that I already know how to use the FT2232H Mini Module with DE0 Nano. I use Quartus II and Verilog by the way. Any suggestion, link or example would be greatly appriciated. Thanks...

  FPGA, VHDL & Verilog ·Murat GUNES ·2013-08-21 23:20 ·4 Replies

• Thread

  FT2232H in FT245 FIFO Mode - burst not working

  Hi! I am trying to burst data out of my Cyclone II via a FTDI FT2232H -Chip in FT245 FIFO mode (see FT245_fifo.png) as described in the FTDI Application Node 130 (see burst.png): [c]A write operation can be started when TXE# is low. WR# is brought low when the data

  yet as well. does anyone have a working example/design that can actually burst data through the ft2232h?

  FPGA, VHDL & Verilog ·Thomas L. ·2011-07-21 02:33 ·4 Replies

• Thread

  Low Cost FPGA Development Board

  peters mentioned, one of the advantages of posedge over papilio-pro is the interface between fpga and ft2232h which allows a high speed (10MB/s) usb connection between host and fpga.

  FPGA, VHDL & Verilog ·Abolfazl ·2015-12-03 11:59 ·7 Replies

• Article

  Benutzer:Someonenew

  :). Last Changed: --Someonenew 21:03, 5. Apr. 2011 (UTC) JTAG. man nehme: für die hardware: ein ft2232H mini modul ein rs232 transceiver eine hand voll (high speed) optokoppler ein bischen eagle gewürzt mit hühnerfutter. eagle lib von hier: spezialitäten von i2c und spi wollen noch geklärt werden. für

  Article ·2011-04-08 15:26

• Article

  JTAG

  Obwohl in Java geschrieben, funktioniert es nur unter Windows. Funktioniert im Prinzip mit allen FT2232(H) basierten Adaptern. FT2232 BoundaryScan Tool: free boundary-scan software for flash programming [S29GL128N, S29GL256N, S29GL512N, M25PX16, M25PX32, M25PX64, etc ]. boundary scan test system M-1 for

  Article ·2021-01-10 14:07

• Article

  USB

  csd-electronics Watterott electronic libftdi - FTDI (bitbang) software collection von Intra2net (Opensource) FT2232H FTDI Device 64 RS232 / (synchron/asynchron) parallel 8 bit / I2C, SPI, JTAG 2 bidirektionale FIFOs, HS ** libftdi - FTDI (bitbang) software collection von Intra2net (Opensource) FT4232H FTDI Device

  Article ·2022-11-23 21:32

• Thread

  OpenHR20: Firmware for Honeywell Rondostat HR20E

  spent the weekend testing 3 devices of above type. Since I'm on Linux and own only a generic FT2232H JTAG interface (Olimex ARM-USB-OCD-H), I had trouble flashing the firmware: avrdude didn't work, since the built-in FT2232HIO driver works in ISP-Mode only (and I didn't want to solder each device

  µC & Digital Electronics ·Mario Fischer ·2022-11-26 13:30 ·1121 Replies

Alle 9 Treffer zu FT2232H anzeigen