Forum: µC & Digital Electronics atmega32u2 TeensyHID question

Author: Addy De jongh (3dotter)
Posted on:
Attached files:

Rate this post
0 useful
not useful
Hi, excuse me for not writing in German. I can read German, but my
German writing is awful. I am a newbie in atmega programming.

I have a atmega32u2 hardware setup which needs an internal clock running
at 8 MHz. It means I can not use DFU, but have to use TeensyHID, which
has been part of LUFA (here:
http://www.fourwalledcubicle.com/files/MyUSB/LUFA%...). This
setup however is meant for ATMEGA32U4 (Teensy 2.0) with 16 MHz external

My question is what settings I should have in the makefile for my
atmega32u2 and also what fuse and lockbits settings I need. By the way I
have attached the complete source and visual studio project file package 
building the teensyHID for the related and PIN compatible at90usb162 MCU
related to the board I am using.

I hope someone can help me. Thanks in advance!


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.