EmbDev.net

Forum: ARM programming with GCC/GNU tools free simulator?


Author: Ed Wood (Guest)
Posted on:

Rate this post
0 useful
not useful
Hi, I'm looking for a free simulator. not only for the ARM architecture
itself but also for the peripherals. Im using a STR9 (ARM9). It's not
important that it doesn't work with winarm or yagarto (or another free
toolchain), something like a standalone simulator would work too.
sorry, I'm new in ARMs.

Author: Clifford Slocombe (clifford)
Posted on:

Rate this post
0 useful
not useful
Ed Wood wrote:
> Hi, I'm looking for a free simulator. not only for the ARM architecture
> itself but also for the peripherals. Im using a STR9 (ARM9). It's not
> important that it doesn't work with winarm or yagarto (or another free
> toolchain), something like a standalone simulator would work too.
> sorry, I'm new in ARMs.

Try Keil's free eval version of uVision. That's a lot of work, few will
give it away for free.

Author: Ed Wood (Guest)
Posted on:

Rate this post
0 useful
not useful
ok, thx, I've tried it.
But is there no other free way to simulate my project (with
peripherals)? I've found the Skyeye-Project
(http://skyeye.sourceforge.net/) but it's not for ARM9. But something
like that would be perfect.

Author: Clifford Slocombe (clifford)
Posted on:

Rate this post
0 useful
not useful
Ed Wood wrote:
> ok, thx, I've tried it.
> But is there no other free way to simulate my project (with
> peripherals)? I've found the Skyeye-Project
> (http://skyeye.sourceforge.net/) but it's not for ARM9. But something
> like that would be perfect.

That's an interesting link. I take it back, some will give it away for
free. However the point about it being a lot of work still stands, there
are many ARM core microcontrollers all with proprietary peripherals, so
maintaining support for all of them is a big ask.

Clifford

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]




Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.