EmbDev.net

Forum: ARM programming with GCC/GNU tools download utility for lpc2368


Author: Tom (Guest)
Posted on:

Rate this post
0 useful
not useful
Does anybody know a download utitity for the new ethernet controllers
from nxp.

The utility from Philips don't support the new controllers up to now.

Thanks in advance, Tom

Author: Martin Thomas (mthomas) (Moderator)
Posted on:

Rate this post
0 useful
not useful
Tom wrote:
> Does anybody know a download utitity for the new ethernet controllers
> from nxp.
>
> The utility from Philips don't support the new controllers up to now.

Yes. And maybe never will. You have not read the "Migration to the
LPC2300/2400 family" app-note. Flash Magic from Embedded System Academy
is already mentioned there. I have also succesfully tested lpc21isp with
an LPC2378, so it might work with LPC2368 too.

Martin Thomas

Author: Tom (Guest)
Posted on:

Rate this post
0 useful
not useful
Martin Thomas wrote:
> Tom wrote:
>> Does anybody know a download utitity for the new ethernet controllers
>> from nxp.
>>
>> The utility from Philips don't support the new controllers up to now.
>
> Yes. And maybe never will. You have not read the "Migration to the
> LPC2300/2400 family" app-note. Flash Magic from Embedded System Academy
> is already mentioned there. I have also succesfully tested lpc21isp with
> an LPC2378, so it might work with LPC2368 too.
>
> Martin Thomas

Thanks for your reply, the flash magic tool is the missing link:-)

Tom

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]




Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.