EmbDev.net

Forum: ARM programming with GCC/GNU tools Winarm and ARM JTAG


Author: Mikko (Guest)
Posted on:

Rate this post
0 useful
not useful
Hello!
I'm newbie with arm and just trying to get familiar with things.
I have ordered ArmJtag wiggler from Olimex and my question is
can i use this wiggler with winarm debugging?

http://www.olimex.com/dev/arm-jtag.html



Thank you

Author: Stefan Brueck (Guest)
Posted on:

Rate this post
0 useful
not useful
Not easy to answer this, because there is no information about your
target. You need a software interface between host (PC, e.g. GDB
debugger software) and target (specific microcontroller with ARM core),
which controls the wiggler. OpenOCD is a working interface software for
WinARM and LPC???? type of targets.

Author: Mikko (Guest)
Posted on:

Rate this post
0 useful
not useful

Author: Fordp (Guest)
Posted on:

Rate this post
0 useful
not useful
Mikko wrote:
> My targets are:
>
> http://www.olimex.com/dev/lpc-p2103.html
>
> and
>
> http://www.olimex.com/dev/lpc-p2124.html

The LPC2103 works with OCDemon.
We have had it working sometimes with OpenOCD, but the version we tried
was not as reliable as OCDemon.

I would recommend you follow Jim Lynch's Tutorials.

Good Luck ;)

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]




Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.