EmbDev.net

Forum: ARM programming with GCC/GNU tools Welcome


Author: Martin Thomas (Guest)
Posted on:

Rate this post
0 useful
not useful
Welcome to the WinARM/arm-gcc Forum.

Feel free to place any question about WinARM or the examples provided
with WinARM in this forum. Since WinARM is just a collection of tools
around the arm-elf-gcc compiler questions about the toolchain in general
are welcome too.

The forum is not limited to the arm-elf-toolchain on MS-Windows-systems
or target controllers for which there are examples included in WinARM or
provided on the WinARM-page.

Question about the gnu compiler and tools? - Please ask.
Question about a WinARM example?  - Please ask.
Question about an ARM controller? - Please ask.
You know the answer to a question? - Well, you guessed it: Please
answer.

This forum will live from good questions and inspiring answers.

Have fun.

Martin Thomas
Andreas Schwarz

---
WinARM:
http://www.siwawi.arubi.uni-kl.de/avr_projects/arm...
GNU toolchain for Linux and Mac OS X:
http://www.mikrocontroller.net/en/arm-gcc

Author: Mh Tay (lpc2103)
Posted on:

Rate this post
0 useful
not useful
Nice Tools Package!  Got it up easily...
- Unzip package
- Add %PATH% to WinXP system
- Use programmer notepad from installed WinAvr
  on my PC and everything just working fine
- Patched makefile on my old GCC3.0 project and
  it gets compiled and running in thumb mode now.
Thanks!

Author: Martin Thomas (Guest)
Posted on:

Rate this post
0 useful
not useful
MH Tay wrote:
> Nice Tools Package!  Got it up easily...
> - Unzip package
> - Add %PATH% to WinXP system
> - Use programmer notepad from installed WinAvr
>   on my PC and everything just working fine
> - Patched makefile on my old GCC3.0 project and
>   it gets compiled and running in thumb mode now.
> Thanks!

Thank you for your kind feedback.

Martin Thomas

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]




Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.