EmbDev.net

Forum: ARM programming with GCC/GNU tools u-boot


Author: sailesh (Guest)
Posted on:

Rate this post
0 useful
not useful
Hi All,

I want to port u-bbot on ARM core and I have a evaluation board from
EMBEST.
Can some one tell me the steps how to compile the u-boot (open source
from net) then how to get the appropriate tool chain to compile the
u-boot for ARM core (MMU less).

I am very new to this domain but very interested to do the same. Please
exten your support

Thanks
Sailesh

Author: Martin Thomas (Guest)
Posted on:

Rate this post
0 useful
not useful
sailesh wrote:

> I want to port u-bbot on ARM core and I have a evaluation board from
> EMBEST.
> Can some one tell me the steps how to compile the u-boot (open source
> from net) then how to get the appropriate tool chain to compile the
> u-boot for ARM core (MMU less).

Since you did not mention for which target you'd like to port u-boot
this might not help:
Redboot has been ported for the AT91SAM7S-series and some LPC2xxx, Maybe
you can use a ready-made redboot-image and save the time to port u-boot.

Martin Thomas

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]




Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.