Forum: µC & Digital Electronics IP with axi-stream slave and axi4-full master interface

von zyed (Guest)

Rate this post
0 useful
not useful
Dear all,
I am developing a custom AXI IP using vivado. it  has axi-stream slave 
and  axi4-full master interface. my goal is to connect the master 
interface to zed board HP0 (axi3 slave interface). Since the input is 
the input and output axi standards are different i dont  know how to map 
the input AXI stream signal to AXI4 ful master interface. I tried 
earlier where both I/O were stream interface where i simply mapped input 
to output and it worked fine. any suggestion would be really helpful to 
proceed. Thanks


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.