Forum: µC & Digital Electronics MM80 RS485 MUX32 multidrop protocol

von Miros (Guest)

Attached files:

Rate this post
0 useful
not useful
Hello guys,

does someone of you have any information about the the MUX32 multidrop 
protocol for EMS MM80MicroMux Bus Module?


At the moment I'm using EMS LRP820 RFID readers and I want to find out 
how the module is communicating with the readers and also how the 
response looks like. I would like to use other readers and I have to 
programm it in this way. Also the timing would be very important.

I'm looking forward to all information you have.

Thank you.
Salute Miros

: Moved by Admin
von Miros (Guest)

Rate this post
0 useful
not useful


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.