EmbDev.net

Forum: µC & Digital Electronics Connecting 3.95" TFTLCD for Arduino mega 2560(ili9488) by MCUFRIEND


Author: jimwoo (Guest)
Posted on:
Attached files:

Rate this post
0 useful
not useful
Screen 480 x 320 pix. 16 bit bus.
Real LCD controller - Renesas R61581.
Touch Screen Controller - XPT2046.
Color mode RGB (5-6-5 bit).
Project for AVR Studio, PCB scans attached.
Everything working good.

Author: Jim W. (jimwoo)
Posted on:
Attached files:

Rate this post
0 useful
not useful
Full pinout. LCD was used with ARDUINO mega2560 (5V power). If you want 
to use it with 3.3V power replace all Resistors to 0 Ohm.

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]




Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.