Forum: µC & Digital Electronics How to draw photodiode SFH213 in LTspice

von Oliver B. (oliver16)

Attached files:

Rate this post
0 useful
not useful
Hi all,
the photodiode used in the attached circuit is an SFH213 and I wish to 
draw it in LTspice. However, I can't find this photodiode model in 
LTspice. Can anybody help me by telling me how I can draw this 
Thanks in advance.

von Clemens L. (c_l)

Rate this post
0 useful
not useful
Even if you have drawn it: how are you going to control it?

I'd guess you have to use an optocoupler instead.
(see http://electronics.stackexchange.com/q/241847/29811)

: Edited by User
von Bordodynov (Guest)

Rate this post
0 useful
not useful
See http://ltwiki.org/index.php5?title=Components_Library_and_Circuits
A Large LTspice Folder from Bordodynov.
In my folder, there are several models and symbols of photodiodes. The 
model allows you to set the power incident light.


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.