Forum: µC & Digital Electronics Korad KA3005 heatsink drill template

Author: 11 (Guest)
Posted on:
Attached files:

Rate this post
0 useful
not useful
Here is a drill template for all the owners of a korad (sigrok) KA3005 
power supply who want to upgrade the crappy internal heatsink.
The original heatsink is just an aluminium plate in front of the fan, I 
replaced it with a 100mm x 100mm x 15mm heatsink.

Have fun.

Author: 12 (Guest)
Posted on:

Rate this post
0 useful
not useful
Do you have a ordering number/data sheet for the heat sink?


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.