Forum: µC & Digital Electronics Digital Audio I/O Transformer Selection

von Andy (Guest)

Rate this post
0 useful
not useful

I'd like to implement a digital audio interface (AES3 110Ohms via XLR) 
with galvanic isolation to avoid ground loops. Here, on pages 43 and 45, 
is an example of what I need:
However I don't know how to select the correct transformer for my 

As an example, here is a datasheet of digital audio transformers by 
On what parameters in an application do I base my decision for one of 
the primary inductance ranges?
A brief explanation or a link to some further reading material would be 
highly appreciated :)



Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.