EmbDev.net

Forum: µC & Digital Electronics LPC1114 & FT232 & Flashmagic


LPC1114 & FT232 & Flashmagic
Author: TM (Guest)
Posted on:
Rate this post
0 ▲ useful
▼ not useful 
Hello,

Is it possible to program the lpc1114 with a FTDI232 with Flash Magic 
without touching the circuit if I use this connections:

FTDI - LPC1114
DTR - Reset
RST - PIO0_1
TXD - RXD
RXD - TXD

Or is the FTDI Chip not compatible with the control signal which are 
needed?

regards Tobias

Report post Edit Move Thread sperren Anmeldepflicht aktivieren Delete topic Thread mit anderem zusammenführen Quote selected text Reply Reply with quote
Watch this topic | Disable multi-page view

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]



Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.