Forum: ARM programming with GCC/GNU tools STR91xFA : seek Makefile for GNU-GCC with good temper

von Andre G. (andre_g)

Rate this post
0 useful
not useful
   would you post (tar bzipped attachment) the following:
   1- Makefile to build STR91FxFAxxx cpu fpr GNU-ARM tools.
   2- Assembly file(s) of the startup code
   3- Linker file (.ld)
   4- Any C file (hello for example) which will build with  the Makefile 


Note: the ST91xFA Firmware Library build as described above would indeed 
be nice!


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.