Forum: µC & Digital Electronics SPI connection to Vdrive2

von Flo (Guest)

Rate this post
0 useful
not useful

I’m working on a project with the Vdrive2 and tried to communicate with 
a PIC18f4550 via SPI. SPI is working correctly,
but it doesn’t work when i connect the Vdrive2(VNC1L).
With Hyperterminal it’s working correctly using the commands from the 
data sheet.
Vdrive is jumpered for SPI, baud rate should be correct, also the 
connection between microcontroller and Vdrive2.


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.