Forum: ARM programming with GCC/GNU tools Flash-programming with OpenOCD

von Smith S. (smithsand123)

Rate this post
0 useful
not useful
OpenOCD supports flash programming on NXP/Philips LPC2000, Atmel
AT91SAM7 and ST STR7 ARM7-controllers . Flash-programming can be done by
accessing the OpenOCD-telnet-server but I prefer a method where the
flash programming is automated. This is very convenient when working
with make. If everything is setup correctly a simple make program will
transfer the binary-code into the flash-memory.
]<a href="http://www.widecircles.com">Link Building</a>


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.