EmbDev.net

Forum: ARM programming with GCC/GNU tools LM339 datesheet


Author: Huojiao Huang (jojolucky)
Posted on:

Rate this post
0 useful
not useful
Features
• Operation from Single or Dual Supplies
• Common Mode Input Voltage Range to GND
• Output Voltage Compatible with TTL, DTL, ECL,
MOS and CMOS
• Differential Input Voltage Range Equal to the
Supply Voltage
• Maximum Input Offset Voltage (VIO)
- CA139A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 2mV
- CA139, CA239, CA339. . . . . . . . . . . . . . . . . . . . . . 5mV
- LM2901. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 7mV
- LM3302. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 20mV

You can get the pdf of LM339 here: www.chinaicmart.com

Author: Huojiao Huang (jojolucky)
Posted on:

Rate this post
0 useful
not useful
Huojiao Huang wrote:
> Features
> • Operation from Single or Dual Supplies
> • Common Mode Input Voltage Range to GND
> • Output Voltage Compatible with TTL, DTL, ECL,
> MOS and CMOS
> • Differential Input Voltage Range Equal to the
> Supply Voltage
> • Maximum Input Offset Voltage (VIO)
> - CA139A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
> . 2mV
> - CA139, CA239, CA339. . . . . . . . . . . . . . . . . . . . . . 5mV
> - LM2901. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
> . . 7mV
> - LM3302. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
> . 20mV
>
> You can get the pdf of LM339 here: www.chinaicmart.com

i can't find the link <a
href="http://www.chinaicmart.com/suppliers/510/LM339.html";
target="_blank">LM339</a>

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]




Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.