icswift SAM7x256

J. F. OP #1173811
Rate this post
• ▲ useful
▼ not useful 
Hi, I'm a beginner with this ARM architecture, in spite of being an AVR
expert.

I bought this board to make some simple CAN bus tests.
http://www.ic-board.de/product_info.php?info=p43_ICswift-SAM7X256.html

But I'm with some problems in getting it started.

I have downloaded the softpack-1.4-at91sam7x-ek-web with some examples
form atmel just to see how it works.

My problem is in transfering the .bin code to the flash memory of the
board via USB.

I start sam-ba and connect to the board via usb just fine.

Then i select the .bin file from the FLASH tab and hit the send file
button, but it stays on the "please wait" window forever and freezes the
SAM-BA program.

Any ideia to get it working ?!?!

Thanks
Reply Quote Edit Move Thread sperren Anmeldepflicht aktivieren Anpinnen Delete topic Thread mit anderem zusammenführen Report post
Watch this topic

Reply

Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.

Formatting
  • [c]C-Code[/c]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]
  • [[Title]] – link to an article
  • Link to another post: right-click its post ID (#8078628), copy the address, paste it into the text

More about formatting

Post long source code as an attachment, not in the text.

Your name and e-mail address

Already registered? Log in

Not shown to anyone. We send you a link; your post appears once you confirm it there.

By submitting you create a free account and accept the terms of use.