EmbDev.net

Forum: ARM programming with GCC/GNU tools Testing gui application on AT91SAM9260


Testing gui application on AT91SAM9260
Author: Sailaja Yadam (sailaja)
Posted on:
Rate this post
0 ▲ useful
▼ not useful 
Hello,



I am using at91sam9260.
My board boots with busybox linux distribution.
I am usign Cygwin on PC and also i have installed arm cross compiler
chain
for the board.

To test gui application on the board.
Can any one tell me which toolchain i have to use.


sailaja

Report post Edit Move Thread sperren Delete topic Thread mit anderem zusammenführen Quote selected text Reply Reply with quote
Re: Testing gui application on AT91SAM9260
Author: Jonathan Dumaresq (dumarjo)
Posted on:
Rate this post
0 ▲ useful
▼ not useful 
> To test gui application on the board.
> Can any one tell me which toolchain i have to use.
>
>
> sailaja

What GUI you will use ?

Jonathan

Report post Edit Delete Quote selected text Reply Reply with quote
Watch this topic | Disable multi-page view

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]



Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.