Forum: ARM programming with GCC/GNU tools STR9 WinArm Support

von TudaPellini (Guest)

Rate this post
0 useful
not useful
Greetings WinArm friends,
I'm planning to use an ARM9 from ST (for example, the STR911FR44) with
WinARM. This processor uses a ARM9E CPU core (ARM966E-S).
I have used the Atmel ARM9 AT91RM9200 before with any problem.
Will the ST chip be a problem ?
Can i compile some code with no problem at all ?
Comments are appreciated
Thanks for the attention

von Spencer O. (ntfreak)

Rate this post
0 useful
not useful
Not using winarm but as it is only gcc than it will be no problem.
I have used gcc for about 9 months now with the str9.



Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.