Forum: ARM programming with GCC/GNU tools Port to ARM-710T (Psion)?

von Michael F. (mifrischer)

Rate this post
0 useful
not useful
would it be possible to port it to the NEC ARM-710T with 36,8 Mhz?
My Psion 5 MX is running Linux, but mgg123 is a bit to slow and has
problems with the downscaling:-(
The main problem would be that the sound-chip, which is supported by the
kernel, can only do 8kHz by 16 bit....

I have some little experiemence with c, but not with asm...



Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.