Forum: ARM programming with GCC/GNU tools winARM & LPC E2129

von rafik (Guest)

Rate this post
0 useful
not useful
I use winARM with a  LPC E2129 board,
with OCDremote and insight-Elf via the JTAG  before I arrived  to
connect  on the board and  to unroll the code except that its remainder
not in the memeoire of the processor (to the reset nothing!! somebody
can help me)
and now with the launching of insight an error message appears:
  nitializeTarget Error: Not in Background
> Process Exit Code: 1
> Time Taken: 00:08
 of the assistance thank you


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.