USB to I2S adapter for audio transceiver

ilans Guest #5717719
Rate this post
• ▲ useful
▼ not useful 
Hello, all!

I need an adapter / bridge to connect a MEMS tranceiver to my PC, to 
stream audio data for DSP purposes.

The tranceiver can either send or receive PDM data at up to 3.072mHz 
(based on clock input).

I suppose I need an I2S-USB adapter / bridge, that also comes with a 
driver software, where I can set direction, data and clock rate.

It should be fast and reliable enough to allow real-time DSP analysis on 
the PC.

Can you please recommend such a tool?

Thanks!
Reply Quote Edit Move Thread sperren Anmeldepflicht aktivieren Anpinnen Delete topic Thread mit anderem zusammenführen Report post
Ainsworth P. (Company: IBM) #7689515
Rate this post
• ▲ useful
▼ not useful

Hello, As per my knowledge, You need an I2S-USB adapter to connect your MEMS transceiver to your PC for streaming audio data ,it help to support PDM data up to 3.072 MHz and come with driver software to configure data direction and clock rates. Make sure that this is fast and reliable enough for real-time DSP analysis on your PC.

Reply Quote Edit Delete Report post
J. S. #7717510
Rate this post
• ▲ useful
▼ not useful

USB to I2S adapters are available in masses. The issue is the processing of the PDM. Depending on the application a specific filtering has to be applied to provide the most appropriate PCM signal from it to feed I2S. I once used a €7,- FPGA to implement a PDM-Filter and I2S decoder for this.

In the meanwhile I came out with an S/PDIF output which I read directly with a PC. If your soundcard cannot do this, use a $20,- USB_to_S/PDIF-Converter.

If you need the PDM directly in the PC use a DSD-capable Audio Soundcard. Practically 3.072M is in fact DSD64-style.

Reply Quote Edit Delete Report post
Watch this topic

Reply

Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.

Formatting
  • [c]C-Code[/c]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]
  • [[Title]] – link to an article
  • Link to another post: right-click its post ID (#8078628), copy the address, paste it into the text

More about formatting

Post long source code as an attachment, not in the text.

Your name and e-mail address

Already registered? Log in

Not shown to anyone. We send you a link; your post appears once you confirm it there.

By submitting you create a free account and accept the terms of use.