mapping the exact input to the output

#include "stm32f0xx.h"
#include "stm32f0308_Discovery.h"

#define in0 GPIO_Pin_0
#define in1 GPIO_Pin_1
#define in2 GPIO_Pin_2
#define in3 GPIO_Pin_3
#define in4 GPIO_Pin_4
#define in5 GPIO_Pin_5
#define in_GPIO GPIOA


#define out0 GPIO_Pin_0
#define out1 GPIO_Pin_1
#define out2 GPIO_Pin_2
#define out3 GPIO_Pin_3
#define out4 GPIO_Pin_4
#define out5 GPIO_Pin_5
#define out_GPIO GPIOC



void TM_Delay_Init(void);
void TM_DelayMillis(uint32_t millis);
void TM_DelayMillis1(uint32_t millis);
void TM_DelayMillis2(uint32_t millis);

GPIO_InitTypeDef       GPIO_InitStructure ;

uint32_t multiplier;


int main(void)
{
          SystemInit();
          SystemCoreClockUpdate();
          TM_Delay_Init();


        RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOA, ENABLE);
        RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOC, ENABLE);


  /* Configure PA in input mode */
      GPIO_InitStructure.GPIO_Pin = (GPIO_Pin_0)|(GPIO_Pin_1);
      GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
      GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;              // 
enable internal Pullup resistors on the GPIO pins
      GPIO_Init(GPIOA, &GPIO_InitStructure);

  /* Configure PC15 - PC0 in output pushpull mode */
  GPIO_InitStructure.GPIO_Pin = (GPIO_Pin_0)|(GPIO_Pin_1);        //in 
this example ALL the pins (PC15 - PC0) are outputs
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
  GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
  GPIO_Init(GPIOC, &GPIO_InitStructure);


  while(1)
  {
    if(GPIO_ReadInputDataBit(GPIOA,(GPIO_Pin_0))==1)
      {
        GPIO_SetBits(out_GPIO,(out0));
        TM_DelayMillis(7);
        GPIO_ResetBits(out_GPIO,(out0));

        while (GPIO_ReadInputDataBit(GPIOA, (GPIO_Pin_0))==1)
          GPIO_SetBits(out_GPIO,(out0));
          TM_DelayMillis1(3);
          GPIO_ResetBits(out_GPIO,(out1));
          TM_DelayMillis2(22);
      }
    }
  }

  void TM_DelayMillis(uint32_t millis) {
    /* Multiply millis with multipler */
    /* Substract 10 */
    millis = 100  millis  multiplier - 10;
    /* 4 cycles for one loop */
    while (millis--);
}

void TM_DelayMillis1(uint32_t millis) {
    /* Multiply millis with multipler */
    /* Substract 10 */
    millis = 1  millis  multiplier - 10;
    /* 4 cycles for one loop */
    while (millis--);
}

void TM_DelayMillis2(uint32_t millis) {
    /* Multiply millis with multipler */
    /* Substract 10 */
    millis = 1  millis  multiplier - 10;
    /* 4 cycles for one loop */
    while (millis--);
}



void TM_Delay_Init(void) {
    RCC_ClocksTypeDef RCC_Clocks;

    /* Get system clocks */
    RCC_GetClocksFreq(&RCC_Clocks);

    /* While loop takes 4 cycles */
    /* For 1 us delay, we need to divide with 4M */
    multiplier = RCC_Clocks.HCLK_Frequency / 4000000;
}


Note:sir kindly help me in mapping the many input and many output that 
is i want when i make high in0 my output should be high that is out0. 
when i give in1 then my out1 should be high all other pins should be 
low.

kindly help me to configure.