OpenOCD load and debug fails sometimes

Mike Guest #1436284
Rate this post
• ▲ useful
▼ not useful 
Hi,

I'm trying to debug and flash my STM32 with OpenOCD/GDB.

I start openocd with the following command:
openocd -f openocd.cfg -c init

My Debug / Load configuration:
1
target extended-remote localhost:3333

2
monitor soft_reset_halt

3
set mem inaccessible-by-default off

4
load

5
compare-sections

6
monitor reset init


Load works  only  one attempt out of 5. The error message is just Load 
failed...

Does anyone have a clue what the problem could be?

Thanks a lot!
Reply Quote Edit Move Thread sperren Anmeldepflicht aktivieren Anpinnen Delete topic Thread mit anderem zusammenführen Report post
Martin T. Moderator #1436695
Rate this post
• ▲ useful
▼ not useful 
Mike wrote:
>...
> I start openocd with the following command:
> openocd -f openocd.cfg -c init
Please show openocd.cfg.
You may also just try:
1
openocd -f interface/<yourinterface> -f target/stm32 init

which will use files from the "target library". I have used them in my 
STM32 projects with success.
Reply Quote Edit Delete Report post
Mike Guest #1436959
Rate this post
• ▲ useful
▼ not useful 
Hi,

openocd.cfg:

1
interface ft2232

2
ft2232_vid_pid 0x0403 0x6010

3
ft2232_device_desc "Dual RS232 A"

4
ft2232_layout "oocdlink"

5
ft2232_latency 2

6


7
set BSTAPID 0x16410041

8
set WORKAREASIZE 0x5000

9


10


11
source  "C:/program files/openocd/target/stm32.cfg"


Openocd recognizes the target as stm32.
I use the yagarto toolchain with eclipse.
Reply Quote Edit Delete Report post
Watch this topic

Reply

Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.

Formatting
  • [c]C-Code[/c]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]
  • [[Title]] – link to an article
  • Link to another post: right-click its post ID (#8078628), copy the address, paste it into the text

More about formatting

Post long source code as an attachment, not in the text.

Your name and e-mail address

Already registered? Log in

Not shown to anyone. We send you a link; your post appears once you confirm it there.

By submitting you create a free account and accept the terms of use.