Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.109-venus-10 (oe-user@oe-host) (arm-ve-linux-gnueabi-gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Mon May 29 23:18:17 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Cerbo GX [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x4a000000, size 96 MiB [ 0.000000] OF: reserved mem: initialized node default-pool, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 15 pages/cpu s31564 r8192 d21684 u61440 [ 0.000000] pcpu-alloc: s31564 r8192 d21684 u61440 alloc=15*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk1p3 rootwait ro rootfstype=ext4 5 vt.global_cursor_default=0 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 930756K/1048576K available (6144K kernel code, 647K rwdata, 1304K rodata, 1024K init, 221K bss, 19516K reserved, 98304K cma-reserved, 262144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x314/0x4ac with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000022] Switching to timer-based delay loop, resolution 41ns [ 0.000464] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000807] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370868154 ns [ 0.001084] Console: colour dummy device 80x30 [ 0.001159] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.001184] pid_max: default: 32768 minimum: 301 [ 0.001326] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001347] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002080] CPU: Testing write buffer coherency: ok [ 0.002441] /cpus/cpu@0 missing clock-frequency property [ 0.002472] /cpus/cpu@1 missing clock-frequency property [ 0.002485] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003160] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.003317] rcu: Hierarchical SRCU implementation. [ 0.004057] smp: Bringing up secondary CPUs ... [ 0.014846] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.015005] smp: Brought up 1 node, 2 CPUs [ 0.015029] SMP: Total of 2 processors activated (96.00 BogoMIPS). [ 0.015039] CPU: All CPU(s) started in HYP mode. [ 0.015046] CPU: Virtualization extensions available. [ 0.015794] devtmpfs: initialized [ 0.022542] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4 [ 0.022771] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.022803] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.026153] pinctrl core: initialized pinctrl subsystem [ 0.027346] NET: Registered protocol family 16 [ 0.028749] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.029937] thermal_sys: Registered thermal governor 'step_wise' [ 0.030265] cpuidle: using governor menu [ 0.030472] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.030486] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.054822] cryptd: max_cpu_qlen set to 1000 [ 0.056700] iommu: Default domain type: Translated [ 0.056989] usbcore: registered new interface driver usbfs [ 0.057060] usbcore: registered new interface driver hub [ 0.057114] usbcore: registered new device driver usb [ 0.058737] clocksource: Switched to clocksource arch_sys_counter [ 0.067060] NET: Registered protocol family 2 [ 0.067292] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.068400] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.068438] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.068522] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.068651] TCP: Hash tables configured (established 8192 bind 8192) [ 0.068851] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.068924] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.069128] NET: Registered protocol family 1 [ 0.069997] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 0.070287] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.072504] Initialise system trusted keyrings [ 0.072778] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 0.077198] Key type asymmetric registered [ 0.077224] Asymmetric key parser 'x509' registered [ 0.077285] bounce: pool size: 64 pages [ 0.078410] sun4i-usb-phy 1c13400.phy: Couldn't get regulator usb0_vbus... Deferring probe [ 0.080636] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator [ 0.082610] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.092094] Serial: 8250/16550 driver, 8 ports [ 0.092412] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 0.113068] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 56, base_baud = 1500000) is a U6_16550A [ 0.729659] printk: console [ttyS0] enabled [ 0.755111] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 57, base_baud = 1500000) is a U6_16550A [ 0.764321] serial serial0: tty port ttyS2 registered [ 0.769829] sun4i-pinctrl 1c20800.pinctrl: supply vcc-ph not found, using dummy regulator [ 0.798447] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 58, base_baud = 1500000) is a U6_16550A [ 0.828523] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 59, base_baud = 1500000) is a U6_16550A [ 0.858630] 1c29400.serial: ttyS5 at MMIO 0x1c29400 (irq = 60, base_baud = 1500000) is a U6_16550A [ 0.888883] 1c29800.serial: ttyS6 at MMIO 0x1c29800 (irq = 61, base_baud = 1500000) is a U6_16550A [ 0.918824] 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 62, base_baud = 1500000) is a U6_16550A [ 0.930441] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.936981] ehci-platform: EHCI generic platform driver [ 0.942811] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.949066] ohci-platform: OHCI generic platform driver [ 0.956752] sunxi-rtc 1c20d00.rtc: registered as rtc1 [ 0.962066] i2c /dev entries driver [ 0.966415] i2c i2c-0: Not using recovery: no suitable method provided [ 0.966884] axp20x-i2c 0-0034: AXP20x variant AXP209 found [ 0.979389] vdd-rtc: supplied by regulator-dummy [ 0.984824] avcc: supplied by regulator-dummy [ 0.990536] ldo3: supplied by regulator-dummy [ 0.995162] ldo4: supplied by regulator-dummy [ 1.000241] ldo5: supplied by regulator-dummy [ 1.005136] vdd-cpu: supplied by regulator-dummy [ 1.010523] vdd-sys: Bringing 1250000uV into 1400000-1400000uV [ 1.016712] vdd-sys: supplied by regulator-dummy [ 1.021924] axp20x-i2c 0-0034: AXP20X driver loaded [ 1.027815] i2c i2c-1: Not using recovery: no suitable method provided [ 1.028150] at24 1-0050: supply vcc not found, using dummy regulator [ 1.035427] at24 1-0050: 256 byte 24c02 EEPROM, read-only [ 1.044247] rtc-pcf8523 1-0068: registered as rtc0 [ 1.050512] rtc-pcf8523 1-0068: setting system clock to 2023-07-02T16:20:33 UTC (1688314833) [ 1.059839] i2c i2c-2: using pinctrl states for GPIO recovery [ 1.065658] gpio-52 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 1.074587] i2c i2c-2: using generic GPIOs for recovery [ 1.081790] i2c i2c-3: Not using recovery: no suitable method provided [ 1.083203] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1) [ 1.091858] watchdog: watchdog0 running and kernel based pre-userspace handler disabled [ 1.106460] NET: Registered protocol family 10 [ 1.106549] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 1.112177] Segment Routing with IPv6 [ 1.116251] sunxi-mmc 1c12000.mmc: allocated mmc-pwrseq [ 1.119251] NET: Registered protocol family 17 [ 1.128998] Registering SWP/SWPB emulation handler [ 1.136086] registered taskstats version 1 [ 1.140277] Loading compiled-in X.509 certificates [ 1.140375] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB [ 1.152784] sunxi-mmc 1c12000.mmc: initialized, max. request size: 16384 KB [ 1.158402] hdmi-vcc: supplied by usb0-vbus [ 1.160627] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB [ 1.166075] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.177040] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.183023] random: fast init done [ 1.189002] ehci-platform 1c14000.usb: irq 43, io mem 0x01c14000 [ 1.192146] mmc2: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.202175] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.209190] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.217405] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.218756] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.223818] mmc2: queuing unknown CIS tuple 0x81 (1 bytes) [ 1.229290] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.242741] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.249971] usb usb1: Product: EHCI Host Controller [ 1.252442] mmc1: new DDR MMC card at address 0001 [ 1.254849] usb usb1: Manufacturer: Linux 5.10.109-venus-10 ehci_hcd [ 1.254862] usb usb1: SerialNumber: 1c14000.usb [ 1.260730] mmcblk1: mmc1:0001 MMC4GB 3.64 GiB [ 1.266784] hub 1-0:1.0: USB hub found [ 1.271162] mmcblk1boot0: mmc1:0001 MMC4GB partition 1 2.00 MiB [ 1.275298] hub 1-0:1.0: 1 port detected [ 1.279582] mmcblk1boot1: mmc1:0001 MMC4GB partition 2 2.00 MiB [ 1.286174] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.300965] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.302149] mmcblk1: p1 p2 p3 p4 < p5 > [ 1.313540] ehci-platform 1c1c000.usb: irq 47, io mem 0x01c1c000 [ 1.348778] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.355135] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.363429] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.368823] mmc2: new high speed SDIO card at address 0001 [ 1.370670] usb usb2: Product: EHCI Host Controller [ 1.381017] usb usb2: Manufacturer: Linux 5.10.109-venus-10 ehci_hcd [ 1.387369] usb usb2: SerialNumber: 1c1c000.usb [ 1.392485] hub 2-0:1.0: USB hub found [ 1.396292] hub 2-0:1.0: 1 port detected [ 1.401243] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.408181] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.416293] ohci-platform 1c14400.usb: irq 44, io mem 0x01c14400 [ 1.492980] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 1.501282] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.508499] usb usb3: Product: Generic Platform OHCI controller [ 1.514430] usb usb3: Manufacturer: Linux 5.10.109-venus-10 ohci_hcd [ 1.520790] usb usb3: SerialNumber: 1c14400.usb [ 1.525907] hub 3-0:1.0: USB hub found [ 1.529753] hub 3-0:1.0: 1 port detected [ 1.534622] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.541769] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.549952] ohci-platform 1c1c400.usb: irq 48, io mem 0x01c1c400 [ 1.623015] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 1.631307] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.638525] usb usb4: Product: Generic Platform OHCI controller [ 1.644457] usb usb4: Manufacturer: Linux 5.10.109-venus-10 ohci_hcd [ 1.650818] usb usb4: SerialNumber: 1c1c400.usb [ 1.655944] hub 4-0:1.0: USB hub found [ 1.659800] hub 4-0:1.0: 1 port detected [ 1.664780] usb_phy_generic usb_phy_generic.0.auto: supply vcc not found, using dummy regulator [ 1.674266] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 1.680614] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 5 [ 1.688648] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.696988] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.704238] usb usb5: Product: MUSB HDRC host driver [ 1.709215] usb usb5: Manufacturer: Linux 5.10.109-venus-10 musb-hcd [ 1.715563] usb usb5: SerialNumber: musb-hdrc.1.auto [ 1.720753] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 1.728121] hub 5-0:1.0: USB hub found [ 1.731998] hub 5-0:1.0: 1 port detected [ 1.930530] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.938754] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.945885] usb 2-1: Product: USB2.0 Hub [ 1.950643] hub 2-1:1.0: USB hub found [ 1.954770] hub 2-1:1.0: 4 ports detected [ 2.168745] usb 5-1: new high-speed USB device number 2 using musb-hdrc [ 2.278744] usb 2-1.2: new full-speed USB device number 3 using ehci-platform [ 2.348859] usb 5-1: New USB device found, idVendor=0424, idProduct=2422, bcdDevice= 0.a0 [ 2.357034] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.364784] hub 5-1:1.0: USB hub found [ 2.368635] hub 5-1:1.0: 2 ports detected [ 2.431268] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c093, bcdDevice=53.00 [ 2.439649] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.446952] usb 2-1.2: Product: Advanced Corded Mouse M500s [ 2.452535] usb 2-1.2: Manufacturer: Logitech [ 2.456889] usb 2-1.2: SerialNumber: 206F39784B42 [ 2.558753] usb 2-1.4: new high-speed USB device number 4 using ehci-platform [ 2.688733] usb 5-1.1: new high-speed USB device number 3 using musb-hdrc [ 2.710517] usb 2-1.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 2.718887] usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.726191] usb 2-1.4: Product: USB2.0 Hub [ 2.731132] hub 2-1.4:1.0: USB hub found [ 2.735397] hub 2-1.4:1.0: 4 ports detected [ 2.819137] usb 5-1.1: New USB device found, idVendor=0bda, idProduct=d723, bcdDevice= 2.00 [ 2.827493] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.834837] usb 5-1.1: Product: 802.11n WLAN Adapter [ 2.839811] usb 5-1.1: Manufacturer: Realtek [ 2.844078] usb 5-1.1: SerialNumber: 00e04c000001 [ 3.058774] usb 2-1.4.4: new full-speed USB device number 5 using ehci-platform [ 3.215647] usb 2-1.4.4: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00 [ 3.224197] usb 2-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.231689] usb 2-1.4.4: Product: FT232R USB UART [ 3.236390] usb 2-1.4.4: Manufacturer: FTDI [ 3.240581] usb 2-1.4.4: SerialNumber: AQ01XE8U [ 3.289413] at24 2-0050: 256 byte 24c02 EEPROM, read-only [ 3.296032] input: button as /devices/platform/button/input/input0 [ 3.310700] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null) [ 3.318953] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 3.326350] devtmpfs: mounted [ 3.330825] Freeing unused kernel memory: 1024K [ 3.338911] Run /sbin/init as init process [ 3.343009] with arguments: [ 3.343014] /sbin/init [ 3.343018] 5 [ 3.343022] with environment: [ 3.343027] HOME=/ [ 3.343031] TERM=linux [ 3.673239] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null) [ 3.831916] udevd[115]: starting version 3.2.9 [ 3.855590] random: udevd: uninitialized urandom read (16 bytes read) [ 3.862807] random: udevd: uninitialized urandom read (16 bytes read) [ 3.869483] random: udevd: uninitialized urandom read (16 bytes read) [ 3.912580] udevd[117]: starting eudev-3.2.9 [ 4.167298] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 4.200847] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 35 MAC: c0:61:9a:b1:64:01 [ 4.274202] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.325309] usbcore: registered new interface driver usbserial_generic [ 4.326931] hid: raw HID events driver (C) Jiri Kosina [ 4.332046] usbserial: USB Serial support registered for generic [ 4.365397] Bluetooth: Core ver 2.22 [ 4.369187] NET: Registered protocol family 31 [ 4.373650] Bluetooth: HCI device and connection manager initialized [ 4.380122] Bluetooth: HCI socket layer initialized [ 4.385038] Bluetooth: L2CAP socket layer initialized [ 4.391018] usbcore: registered new interface driver usbhid [ 4.396613] usbhid: USB HID core driver [ 4.402291] pwm-beeper buzzer: supply amp not found, using dummy regulator [ 4.405705] Bluetooth: HCI UART driver ver 2.3 [ 4.409654] input: pwm-beeper as /devices/platform/buzzer/input/input1 [ 4.413817] Bluetooth: HCI UART protocol H4 registered [ 4.426034] Bluetooth: HCI UART protocol Broadcom registered [ 4.448482] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.469005] usbcore: registered new interface driver ftdi_sio [ 4.474916] usbserial: USB Serial support registered for FTDI USB Serial Device [ 4.482866] ftdi_sio 2-1.4.4:1.0: FTDI USB Serial Device converter detected [ 4.490085] usb 2-1.4.4: Detected FT232RL [ 4.526021] axp20x-adc axp20x-adc: DMA mask not set [ 4.531503] usb 2-1.4.4: FTDI USB Serial Device converter now attached to ttyUSB0 [ 4.586212] CAN device driver interface [ 6.169027] edt_ft5x06 2-0038: touchscreen probe failed [ 6.183146] slcan: serial line CAN interface driver [ 6.188074] slcan: 10 dynamic interface channels. [ 6.200362] sun4i_can 1c2bc00.can: device registered (base=(ptrval), irq=67) [ 6.220839] usbcore: registered new interface driver btusb [ 6.229248] can1: renamed from slcan0 [ 6.241259] Bluetooth: hci1: RTL: examining hci_ver=08 hci_rev=000d lmp_ver=08 lmp_subver=8723 [ 6.253197] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 6.254131] Bluetooth: hci1: RTL: rom_version status=0 version=2 [ 6.268051] Bluetooth: hci1: RTL: loading rtl_bt/rtl8723d_fw.bin [ 6.282147] 8723du: loading out-of-tree module taints kernel. [ 6.288977] sun4i-drm display-engine: bound 1e00000.display-frontend (ops sun4i_frontend_driver_exit [sun4i_frontend]) [ 6.300273] sun4i-drm display-engine: bound 1e20000.display-frontend (ops sun4i_frontend_driver_exit [sun4i_frontend]) [ 6.311291] RTW: module init start [ 6.311586] sun4i-drm display-engine: bound 1e60000.display-backend (ops sun4i_backend_ops [sun4i_backend]) [ 6.314719] RTW: rtl8723du v5.13.4-17-ga6e5ee6.20210514_COEX20200103-3535 [ 6.314724] RTW: build time: May 29 2023 23:20:00 [ 6.314728] RTW: rtl8723du BT-Coex version = COEX20200103-3535 [ 6.315920] Bluetooth: hci1: RTL: loading rtl_bt/rtl8723d_config.bin [ 6.324756] sun4i-drm display-engine: attempt to add DMA range to existing map [ 6.356205] sun4i-drm display-engine: bound 1e40000.display-backend (ops sun4i_backend_ops [sun4i_backend]) [ 6.366769] sun4i-drm display-engine: No panel or bridge found... RGB output disabled [ 6.374722] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops sun4i_tcon_platform_driver_exit [sun4i_tcon]) [ 6.386122] sun4i-drm display-engine: No panel or bridge found... RGB output disabled [ 6.393876] Bluetooth: hci1: RTL: cfg_sz 10, total sz 33266 [ 6.394073] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops sun4i_tcon_platform_driver_exit [sun4i_tcon]) [ 6.420597] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.victronenergy,cerbo-gx.txt failed with error -2 [ 6.441858] lima 1c40000.gpu: gp - mali400 version major 1 minor 1 [ 6.448183] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1 [ 6.454655] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1 [ 6.461074] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus [ 6.469713] sun4i-drm display-engine: bound 1c16000.hdmi (ops sun4i_hdmi_driver_exit [sun4i_drm_hdmi]) [ 6.470013] lima 1c40000.gpu: bus rate = 300000000 [ 6.483915] lima 1c40000.gpu: mod rate = 384000000 [ 6.488390] RTW: HW EFUSE [ 6.489558] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 1 [ 6.491484] RTW: 0x000: 29 81 40 7C 01 88 07 00 A0 04 EC 35 12 C0 A2 D8 [ 6.505843] RTW: 0x010: 2D 2D 2D 2D 2D 2D 2D 2D 2D 2D 2D 02 FF FF FF FF [ 6.513185] RTW: 0x020: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.520361] RTW: 0x030: FF FF FF FF FF FF FF FF FF FF 28 27 26 26 26 26 [ 6.527480] RTW: 0x040: 29 29 29 29 29 02 FF FF FF FF FF FF FF FF FF FF [ 6.534730] RTW: 0x050: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.541942] RTW: 0x060: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.549092] RTW: 0x070: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.556209] RTW: 0x080: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.563364] RTW: 0x090: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.570574] RTW: 0x0A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.577838] RTW: 0x0B0: FF FF FF FF FF FF FF FF 20 22 1D 00 00 00 FF FF [ 6.585120] RTW: 0x0C0: FF 29 20 51 00 E6 00 FF 00 FF 11 FF FF FF FF FF [ 6.592410] RTW: 0x0D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.599680] RTW: 0x0E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.606922] RTW: 0x0F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.608320] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 [ 6.614125] RTW: 0x100: DA 0B 23 D7 C7 46 07 F0 B0 40 D4 29 50 09 03 52 [ 6.629114] RTW: 0x110: 65 61 6C 74 65 6B 16 03 38 30 32 2E 31 31 6E 20 [ 6.636404] RTW: 0x120: 57 4C 41 4E 20 41 64 61 70 74 65 72 00 FF FF FF [ 6.643678] RTW: 0x130: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.650967] RTW: 0x140: FF FF FF FF FF FF FF 0F FF FF FF FF FF FF FF FF [ 6.658150] RTW: 0x150: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.665527] RTW: 0x160: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.672901] RTW: 0x170: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.680135] RTW: 0x180: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.687409] RTW: 0x190: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.687526] cerbo-gx-adc 3-0012: Cerbo GX ADC hw 2, fw 4 [ 6.694603] RTW: 0x1A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.707069] RTW: 0x1B0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.714435] RTW: 0x1C0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.721886] RTW: 0x1D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.728839] Bluetooth: hci0: command 0xfc18 tx timeout [ 6.729154] RTW: 0x1E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.741454] RTW: 0x1F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.781975] input: Logitech Advanced Corded Mouse M500s as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C093.0001/input/input3 [ 6.784193] RTW: hal_com_config_channel_plan chplan:0x20 [ 6.820430] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 6.834752] hid-generic 0003:046D:C093.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Advanced Corded Mouse M500s] on usb-1c1c000.usb-1.2/input0 [ 6.853495] input: Logitech Advanced Corded Mouse M500s Keyboard as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C093.0002/input/input4 [ 6.875507] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Mar 30 2021 01:12:21 version 7.45.98.118 (7d96287 CY) FWID 01-32059766 [ 6.885986] Console: switching to colour frame buffer device 240x67 [ 6.940452] RTW: [RF_PATH] ver_id.RF_TYPE:RF_1T1R [ 6.943228] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device [ 6.949481] RTW: [RF_PATH] HALSPEC's rf_reg_trx_path_bmp:0x11, rf_reg_path_avail_num:1, max_tx_cnt:1 [ 6.971342] RTW: [RF_PATH] PG's trx_path_bmp:0x00, max_tx_cnt:0 [ 6.977363] RTW: [RF_PATH] Registry's trx_path_bmp:0x00, tx_path_lmt:0, rx_path_lmt:0 [ 6.985345] RTW: [RF_PATH] HALDATA's trx_path_bmp:0x11, max_tx_cnt:1 [ 6.989941] input: Logitech Advanced Corded Mouse M500s Consumer Control as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C093.0002/input/input5 [ 6.991848] RTW: [RF_PATH] HALDATA's rf_type:RF_1T1R, NumTotalRFPath:1 [ 7.013484] RTW: [TRX_Nss] HALSPEC - tx_nss:1, rx_nss:1 [ 7.018879] RTW: [TRX_Nss] Registry - tx_nss:0, rx_nss:0 [ 7.024347] RTW: [TRX_Nss] HALDATA - tx_nss:1, rx_nss:1 [ 7.029779] RTW: txpath=0x1, rxpath=0x1 [ 7.033732] RTW: txpath_1ss:0x1, num:1 [ 7.039485] RTW: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1 [ 7.051972] RTW: rtw_ndev_init(wlan1) if1 mac_addr=f0:b0:40:d4:29:50 [ 7.061751] RTW: rtw_ndev_init(wlan2) if2 mac_addr=f2:b0:40:d4:29:50 [ 7.070499] usbcore: registered new interface driver rtl8723du [ 7.076534] RTW: module init ret=0 [ 7.095607] input: Logitech Advanced Corded Mouse M500s System Control as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C093.0002/input/input6 [ 7.113312] hid-generic 0003:046D:C093.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech Advanced Corded Mouse M500s] on usb-1c1c000.usb-1.2/input1 [ 7.227474] brcmfmac mmc2:0001:1 wifi0: renamed from wlan0 [ 7.271948] rtl8723du 5-1.1:1.2 disabled-wlan1: renamed from wlan1 [ 7.280071] Bluetooth: hci1: RTL: fw version 0x828a96f1 [ 7.320044] rtl8723du 5-1.1:1.2 ap0: renamed from wlan2 [ 8.809003] edt_ft5x06 2-0038: touchscreen probe failed [ 12.008976] edt_ft5x06 2-0038: touchscreen probe failed [ 15.208757] Bluetooth: hci0: BCM: failed to write update baudrate (-110) [ 15.215470] Bluetooth: hci0: Failed to set baudrate [ 17.288748] Bluetooth: hci0: command 0x0c03 tx timeout [ 25.448747] Bluetooth: hci0: BCM: Reset failed (-110) [ 25.627165] EXT4-fs (mmcblk1p3): re-mounted. Opts: (null) [ 26.519973] urandom_read: 4 callbacks suppressed [ 26.519985] random: dd: uninitialized urandom read (512 bytes read) [ 26.628470] random: eeprom: uninitialized urandom read (24 bytes read) [ 27.292529] random: crng init done [ 27.474674] watchdog: watchdog0: watchdog did not stop! [ 29.371212] NET: Registered protocol family 38 [ 31.388876] device eth0 entered promiscuous mode [ 33.858918] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 33.867299] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 33.895011] IPv6: ADDRCONF(NETDEV_CHANGE): ll-eth0: link becomes ready [ 36.009625] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 47.141930] can: controller area network core [ 47.146429] NET: Registered protocol family 29 [ 47.323409] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready [ 48.289767] can: raw protocol [ 48.328928] IPv6: ADDRCONF(NETDEV_CHANGE): can1: link becomes ready root@einstein:~# booten bis hierher, kein Touchscreen angeschlossen, USB Maus funktioniert, aber kein Cursor sichtbar. Nach Maus aus und einstecken enumeriert diese neu und funktioniert dann auch mit Cursor. [ 455.722467] usb 2-1.2: USB disconnect, device number 3 [ 457.806328] usb 2-1.2: new full-speed USB device number 6 using ehci-platform [ 457.979181] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c093, bcdDevice=53.00 [ 457.987745] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 457.995153] usb 2-1.2: Product: Advanced Corded Mouse M500s [ 458.000820] usb 2-1.2: Manufacturer: Logitech [ 458.005262] usb 2-1.2: SerialNumber: 206F39784B42 [ 458.015230] input: Logitech Advanced Corded Mouse M500s as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C093.0003/input/input11 [ 458.029545] hid-generic 0003:046D:C093.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech Advanced Corded Mouse M500s] on usb-1c1c000.usb-1.2/input0 [ 458.048811] input: Logitech Advanced Corded Mouse M500s Keyboard as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C093.0004/input/input12 [ 458.126928] input: Logitech Advanced Corded Mouse M500s Consumer Control as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C093.0004/input/input13 [ 458.142900] input: Logitech Advanced Corded Mouse M500s System Control as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C093.0004/input/input14 [ 458.159147] hid-generic 0003:046D:C093.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Advanced Corded Mouse M500s] on usb-1c1c000.usb-1.2/input1 root@einstein:~#