#daemon configuration telnet_port 4444 gdb_port 3333 #interface interface ft2232 ft2232_device_desc "Olimex OpenOCD JTAG TINY A" ft2232_layout "olimex-jtag" ft2232_vid_pid 0x15BA 0x0004 jtag_speed 3 jtag_nsrst_delay 333 jtag_ntrst_delay 333 #use combined on interfaces or targets that can't set TRST/SRST separately reset_config trst_and_srst srst_pulls_trst #jtag scan chain #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe #target configuration daemon_startup reset #target #target arm7tdmi target arm7tdmi little run_and_init 0 arm7tdmi-s_r4 run_and_halt_time 0 30 #target_script 0 reset openocd_flash_lpc2378.script #working_area 0 0x40002000 0x4000 nobackup # LPC2378 @ 12MHz / 0x80000 from 512*1024 #flash bank lpc2000 0x0 0x80000 0 0 lpc2000_v2 0 12000 calc_checksum # For more information about the configuration files, take a look at: # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger # flash for TMS470R1A256 flash bank tms470 0 0 0 0 0 flash info tms470 flash_keyset 0xffffffff 0xffffffff 0xffffffff 0xffffffff tms470 osc_megahertz 12 tms470 plldis 0